FM frequency step

Main unit only

The step is factory-set to 0.2 MHz, but you can change it to receive broadcasts allocated in 0.1 MHz steps. You may need to change this setting if the tuner seems to skip over the correct frequency for stations in your area.

1Press [SELECTOR]9 to select “FM”.

2Press and hold [∫]8 (Stop).

After a few seconds the display changes to show the current minimum frequency. Continue to hold the button down. The minimum frequency changes and the step is changed.

e.g. 87.9 (Factory preset) ,# 87.5

To return to the original step, repeat steps 1 and 2.

[Note]

After changing the setting, previously preset frequencies will be cleared. Preset them again.

Using the START menu

You can select desired source, change the settings, access playback/ menus, etc., by using the START menu.

1

Press [START]C to show the START menu.

≥When using VIERA Link “HDAVI Control”, the TV also turns on

 

when the START menu is displayed.

 

e.g.

 

 

 

 

 

 

DVD/CD

Home theater

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Input select

 

 

 

 

 

 

Setup

 

 

 

2

 

 

 

 

 

 

Press [3, 4]9 to select an item and press [OK]9.

≥To exit, press [START]C.

 

 

 

3 Press [3, 4]9 to make the setting and press [OK]9.

When “Input select” is selected

You can select a desired source from the menu.

≥DVD/CD (B 11), FM RADIO (B 8), AUX§1 (B below), ARC§1 (B below), DIGITAL IN§1, 2 (B below), iPod (B 15)

§1 “(TV)” will appear beside “AUX”, “ARC” or “DIGITAL IN”, indicating the TV audio setting for VIERA Link “HDAVI Control” (B 14).

§2 “(STB)” will appear beside “DIGITAL IN”, indicating the STB audio setting for VIERA Link “HDAVI Control” (B 14).

When “Setup” is selected

You can change the settings for this unit. (B 16)

Other selectable items

The items that are displayed will vary depending on the media and source.

When a disc is loaded, you can also access playback or menus from the START menu.

e.g. [DVD-V]

DVD/CD

Home theater

 

 

 

 

 

 

Playback Disc

 

 

 

 

Playback/menu access

 

 

 

 

 

 

 

 

 

TOP MENU (DVD)

 

 

 

 

 

 

 

 

 

 

 

 

MENU (DVD)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Input select

 

 

 

 

 

 

 

 

 

 

 

 

 

When the on-screen control panel appears

e.g. [DVD-V] (when “Playback Disc” is selected from the START menu)

You can operate the playback with the indicated controls.

Selecting the source by the remote control

Press

To select

 

[DVD]5

DVD/CD

 

[iPod]5

IPOD (B 15)

[RADIO,

Each time you press the button:

EXT-IN]5

FM:

(B 8)

 

AUX:

For audio input through the AUX terminal.

 

ARC:

For audio input through the HDMI AV OUT

 

 

terminal.

 

D-IN:

For audio input through the DIGITAL AUDIO IN

 

 

OPTICAL terminal. (B right)

[Note]

Confirm the audio connection to the AUX, HDMI AV OUT or DIGITAL AUDIO IN OPTICAL terminal on the main unit when you select the corresponding sources (B 7). Reduce the volume on the TV to its minimum, and then adjust the volume of the main unit.

 

Started

audio from this unit’s speakers

Listening to the TV or other device’s

 

 

Getting

Preparation

 

≥Make sure that there is an audio connection between this unit and the

 

TV or other device. (B 7)

 

≥Turn on the TV or/and other device.

 

Press [RADIO, EXT-IN]5to choose the source that is used to connect this unit to the TV or other device.

≥To change the surround sound effects and sound mode, refer to “Enjoying sound effects from all speakers” (B 10).

≥If your Panasonic TV is VIERA Link compatible, refer to “Using the VIERA LinkTM “HDAVI ControlTM”” (B 14) for other related functions.

Making settings for digital audio input

Select to suit the type of audio from the DIGITAL AUDIO IN OPTICAL and HDMI AV OUT terminal on the main unit.

Setting must be made for the “D-IN” and “ARC” selector.

≥Underlined items are the factory presets.

Available settings

Mode

Setting

DUAL:

(Only works with Dolby Dual Mono)

 

– MAIN+SAP (stereo audio)

 

– MAIN

 

– SAP

 

“SAP” = Secondary Audio Program

 

≥Set PCM FIX mode to “OFF” to listen to the “MAIN” or

 

“SAP” audio.

DRC:

– ON

(Dynamic

Adjust for clarity even when the volume is low by

Range

compressing the range of the lowest sound level and

Compression)

the highest sound level. Convenient for late night

 

viewing. (Only works with Dolby Digital)

 

– OFF

 

The full dynamic range of the signal is reproduced.

PCM FIX:

– ON

 

Select when receiving only PCM signals.

 

– OFF

 

Select when receiving Dolby Digital and PCM signals.

 

≥When receiving true 5.1-channel surround sound,

 

select “OFF”.

STB§3:

– SET

(CABLE/SAT

Select when setting the main unit to switch to

AUDIO)

“D-IN” when the input channel of an HDMI connected

 

STB is selected on the TV (B 14, Setting the STB

 

audio for VIERA Link “HDAVI Control”).

 

– OFF

 

Select to cancel this setting.

1 Press [RADIO, EXT-IN]5several times to select “D-IN” or “ARC”.

2 Pressmode.[PLAY MODE]: and then [3, 4]9 to select the 3 While the selected mode is displayed

Press [2, 1]9 and select the desired setting.

§3 Only when “D-IN” is selected.

Be sure to select the device’s (STB, etc.) input channel on the TV when making the setting.

The device must be connected to the Panasonic TV via an HDMI cable.

RQTX1101

9