Panasonic SC-PT660 Assembling the speakers, Preventing the speakers from falling, Simple Setup

step1

Preparation

Assembling the speakers

Simple Setup

≥To prevent damage or scratches, lay down a soft cloth and perform assembly on it.

≥For assembly, use a Phillips-head screwdriver.

≥For optional wall mount, refer to page 6.

[PT754] : Front speakers

Make sure you have all the indicated components before starting assembly, setup, and connection.

2 Front speakers	2 Set of pipes (with cable):	2 Bases	8 Screws	4 Small screws
	For front speakers

Assembling the speakers

1 Join the pipes.	2 Tighten securely.
	Small
	screws
Pipe
Cable

	Pipe	2 Match these holes when
		you insert the pipe.	4
	1
		Slide into the groove.	Tighten
			securely.
Thread the
		3	Screws
cable through
the base.
			Phillips-head
Base			screwdriver
			(not included)

Pull and press the		Tighten securely.	4
cable into the groove.			Insert the wire
	Cable	3
1			fully.
			i: White
2				Push!
			j: Blue
Attach the
pipes to the
speaker.
Pipe		Screws	5 Press into
	Speaker		the groove.

RQTX0094

4

∫Preventing the speakers from falling

≥You will need to obtain the appropriate screw eyes to match the walls or pillars to which they are going to be fastened.

≥Consult a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that may not have strong enough support. Improper attachment may result in damage to the wall or speakers.

e.g. [PT754] Front speakers

String (not included)

Thread from the wall to the speaker and tie tightly.

		Approx.
	Screw eye	150 mm
	(not included)	Wall
Rear of the speaker		(529/32z)