Panasonic SC-PT875 operating instructions Step Assembling the front and surround speakers

step 1 Assembling the front and surround speakers

Preparation

≥To prevent damage or scratches, lay down a soft cloth to assemble speakers.

≥For assembly, use a Phillips-head screwdriver (not included).

Make sure you have all the indicated components before starting assembly, setup, and connection.

≥Keep the screws out of reach of children to prevent swallowing.

≥For optional wall mount, refer to page 26.

2	Front speakers	4 Stands (with cable)	4 Bases	16 Screws
2	Surround speakers

1
Slide into the groove.
Tighten securely.	2

2	Insert the wire fully.
	i: White
	j: Blue
	Push!
Position the cable		1
between the ridges.	Press into the groove.
	Tighten securely.
Leave about 120 mm.
Speaker assembly option

Quick Start Guide Getting Started

Thread the speaker cable through the base.

Leave about 120 mm.

You can remove and use the cable from the stand. To reattach the cable, refer page 26.

Attach the speaker.

Insert the wire fully. i: White

j: Blue Push!

Press into the groove.

Tighten securely.

Slide into the groove.

Preventing the speakers from falling

≥You will need to obtain the appropriate screw eyes to match the walls or pillars to which they are going to be fastened.

≥Consult a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that may not have strong enough support. Improper attachment may result in damage to the wall or speakers.

String (not included)

Thread from the wall to the speaker and tie tightly.

Caution

Do not stand on the base. Be cautious when children are near.

DO

NOT

		Approx.
Screw eye		150 mm
(not included)	Wall

Rear of the speaker

RQTX0234

5