step 4 | AC mains lead connection |
|
|
Start Guide Getting Started
Wireless system
AC IN
Ferrite core
To household mains socket
AC mains lead
(included)
Except [Australia]and[N.Z.]
Before connecting the AC mains lead
Set the voltage.
Use a
Main unit
VOLT ADJ
AC IN
110 127V | 220 240V |
To household
AC mains lead mains
(included) socket
Quick
|
| ||
Conserving power | [Note] | ||
The main unit and the wireless system consume a small amount of | The included AC mains leads are for use with the main unit and wireless | ||
power when they are turned off (main unit: approx. 0.2 W, wireless | |||
system only. Do not use them with other equipment. Also, do not use | |||
system: approx. 0.3 W). To save power when they are not to be used for | |||
leads for other equipment with the main unit or wireless system. | |||
a long time, unplug them from the household mains socket. | |||
| |||
You will need to reset some memory items after plugging in the main |
| ||
unit. |
|
| |
|
|
| |
step 5 | Preparing the wireless system |
| |
|
|
|
Turn on the wireless system after all connections are complete.
WIRELESS LINK
Wireless system
Press [C I, B Í] on the wireless system.
Unit on/off button [C I, B Í]
Use this button to turn the wireless system on and off.
CI: The wireless system is on. B Í: The wireless system is off.
WIRELESS LINK indicator
Red: The wireless system is on and the wireless link is deactivated.
Green: The wireless system is on and the wireless link is activated. (“ [W1] ” is also displayed on the main unit’s display.)
RQTX0234
step 6 | Preparing the remote control |
Batteries
Insert so the poles (i and j) match those in the remote control.
Press in and lift up.
R6/LR6, AAReplace the cover.
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.
≥Use alkaline or manganese batteries.
≥Do not heat or expose to flame.
≥Do not leave the battery(ies) in an automobile exposed to direct sunlight for a long period of time with doors and windows closed.
Do not:
≥mix old and new batteries.
≥use different types of batteries at the same time.
≥take apart or short circuit.
≥attempt to recharge alkaline or manganese batteries.
≥use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can severely damage the remote control.
Remove the batteries if the remote control is not going to be used for a long period of time. Store in a cool, dark place.
Use
Aim at the remote control signal sensor (B 39), avoiding obstacles, at a maximum range of 7 m directly in front of the unit.
10