[PT960] PT956 : Front speakers
Make sure you have all the indicated components before starting assembly, setup, and connection.
2 Front | 2 Stands | 2 Bases | 8 Screws |
speakers | (with cable) |
|
|
Slide into the groove.
| Tighten securely. |
| Insert the wire fully. |
| i: White |
| j: Blue |
Position the cable | Push! |
| |
between the ridges. | Press into the groove. |
| |
| Tighten securely. |
Leave about 90 mm (317/32z) |
|
Simple Setup
Assembling the speakers
Speaker assembly option
Thread the speaker cable through | Attach the speaker. |
the base. |
|
Leave about 100 mm (315/16z) |
|
You can remove and use the cable from the stand. To reattach the cable, refer to page 7.
Insert the wire fully. i: White
j: Blue
Push! 
Press into the groove.
Tighten securely.
∫Preventing the speakers from falling
≥You will need to obtain the appropriate screw eyes to match the walls or pillars to which they are going to be fastened.
≥Consult a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that may not have strong enough support. Improper attachment may result in damage to the wall or speakers.
e.g. [PT760] [PT954] Front speakers | e.g. [PT960] |
| Front speakers | ||
PT956 | |||||
String (not included) |
| String (not included) | |||
Thread from the wall to the speaker and tie tightly. |
| ||||
| Thread from the wall to the speaker and tie tightly. | ||||
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
| Approx. |
| Approx. | ||
| Screw eye | 150 mm |
| |||
| Screw eye | 150 mm | ||||
|
| Wall | 29 |
| ||
Rear of the speaker | (not included) | (5 | /32z) | (not included) | Wall | |
| (529/32z) | |||||
|
|
|
|
| Rear of the speaker |
|
RQTX0105
5
