Panasonic SC-VKX80 Using the timer, Using sound effects, Using the play timer or record timer

Using the timer

Using the play timer or record timer

You can set the timer to come on at a certain time to:

–Wake you up (play timer).

–Record from the radio, music port or AUX (record timer). The play timer and record timer cannot be used together.

Preparation

Switch on the system and set the clock (Z 10).

Play timer	Prepare the music source you want to listen to
	(disc, USB mass storage device, radio, music
	port or AUX) and set the volume.
Record timer	Connect the USB mass storage device (Z 14).
	Tune in to the radio station (Z 16) or select the
	music source from music port or AUX (Z 19).

1 Press [CLOCK/TIMER] to select the timer. CLOCK → # PLAY → # REC

Original display

#PLAY : To set the play timer

#REC : To set the record timer

2 Within 7 seconds, press [6] or [2] to set the start time. 3 Press [CLOCK/TIMER] to confirm.

4 Do steps 2 and 3 again to set the end time.

To start the timer

5 Press and hold [#, –PLAY/REC] to start the timer.

#PLAY #REC

No display (off)

6 Press [`] to switch off the system.

The system must be switched off for the timer to operate.

Change the	Do steps 1 through 4 and 6 again (Z above).
settings
Change the	1.	Press and hold [#, –PLAY/REC] to remove
source or		the timer indicator on the display panel.
volume	2.	Change the source or volume.
	3.	Do steps 5 and 6.
Check the	Press [CLOCK/TIMER] to select “#PLAY” or
settings	“#REC”.
Cancel	Press and hold [#, –PLAY/REC] to remove the
	timer indicator on the display panel.

Note:

•The play timer starts at a low volume and increases gradually to the preset level.

•The record timer starts 30 seconds before the set time with the volume muted.

•The timer comes on at the set time every day if the timer is on.

•If you switch off the system and switch on again while a timer is in operation, the timer will not stop at the end time.

Using the sleep timer		ENGLISH
The sleep timer switches off the system after the set time.
Press [SLEEP] to select the setting (in minutes).
SLEEP 30 → SLEEP 60 → SLEEP 90
	SLEEPOFF ← SLEEP120
To cancel the sleep timer
Select “SLEEPOFF”.
“SLP” indicator goes off.		OPERATIONS
To show the remaining time
Press [SLEEP].
Note:
• The play timer and sleep timer or the record timer and sleep timer
can be used together.
• The sleep timer always comes first. Be sure not to set an overlap
of timers.		OTHER
Using the auto off function

When you are in disc, USB or tape source, the auto off function switches off the system if you do not use the system for 10 minutes.

While in disc, USB or tape source Press and hold [–AUTO OFF]. “A.OFF” indicator is shown.

To cancel the auto off function Press and hold [–AUTO OFF] again. “A.OFF” indicator goes off.

Using sound effects

•These sound effects are possibly not available or can have no effect to some sources.

•The sound quality can decrease when these sound effects are used with some sources. If this occurs, switch off the sound effects.

Surround sound effect

Press [SURROUND].

STANDARD → STEREO → A. SRND

Note:

•This function does not work or has less effect with some discs.

•Select “STEREO” if you experience sound distortion.

•Do not use in combination with surround effects of other equipment.

Changing the sound quality

Preset EQ

1 Press [SOUND] to select “EQ”.

2 Press [Y/U].

HEAVY	Adds punch to rock.
CLEAR	Clarifies higher frequencies.
SOFT	For background music.
EQ-OFF	Cancels all sound effects.

RQTX1220

17

17

VKX80_GC_1En.indd 17 9/22/2010 2:34:45 PM