Panasonic SC-VKX80 manual Changing system settings

Changing system settings

ENGLISH

1 Press [4, DVD/CD].

2 Press [SETUP] to show the SETUP menu.

3 Press [R/T] to select the menu and press [OK]. To go back to the previous menu, press [, RETURN].

4 Press [R/T] to select an item and press [OK].

5 Press [R/T] to make the setting and press [OK].

6 Press [SETUP] to close the screen.

•The settings stay intact even if you put the system on standby mode.

•Underlined items are the factory settings in the menu.

OTHER OPERATIONS

EASY SETUP allows successive settings of the items in the shaded area.

“DISC” menu

CURRENT SETTINGS		Show the current setting of the items in this menu.
AUDIO		ENGLISH	FRENCH	SPANISH	GERMAN	RUSSIAN
Change the audio language.		HUNGARIAN	CZECH	POLISH	ORIGINAL 1	OTHER ---- 2
SUBTITLE		AUTO 3	ENGLISH	FRENCH	SPANISH	GERMAN
Change the subtitle language.		RUSSIAN	HUNGARIAN	CZECH	POLISH	OTHER ---- 2
MENUS		ENGLISH	FRENCH	SPANISH	GERMAN	RUSSIAN
Change the language for disc menus.		HUNGARIAN	CZECH	POLISH	OTHER ---- 2
RATINGS		Setting ratings
Set a ratings level to limit DVD-Video		0 LOCK ALL: To prevent playback of discs without ratings levels.
playback.		1 to 7: To prevent playback of DVD-Video with the same ratings recorded on them.
		8 NO LIMIT
		When you set the ratings level, a password screen is shown.
		Follow the on-screen instructions.
		Do not forget your password.
		A message screen is shown if a DVD-Video with higher ratings level is played.
		Follow the on-screen instructions.
PASSWORD		1. Select “CHANGE” and press [OK].
Change the password for “RATINGS”		2. Input the current password with the numeric buttons, then press [OK].
(Z above).		3. Input the new password with the numeric buttons, then press [OK].
		If “VERIFY” is shown, make sure that the new password is correct and input it again.
1	The original language designated on the disc is selected.
2	Input the applicable code from the “Language code list” (Z 23).
3	If the language selection for “AUDIO” is not available for the disc played, the subtitles in that language will be shown (if available on the disc).

RQTX1220

20

20

“VIDEO” menu

CURRENT SETTINGS	Show the current setting of the items in this menu.
TV ASPECT	16:9: Widescreen TV (16:9)
Change the setting to suit your TV and
	4:3PAN&SCAN: Regular aspect TV (4:3)
preference.
	The sides of the widescreen picture are cut off so it fills the screen (unless
	prohibited by the disc).
	4:3LETTERBOX: Regular aspect TV (4:3)
	Widescreen picture is shown in the letterbox style.
TIME DELAY	0 ms	20 ms	40 ms
When connected with an AV amplifier	60 ms	80 ms	100 ms
and Plasma TV, adjust if the audio is
out of sync with the video.
NTSC DISC OUT	NTSC: Output signals from NTSC discs remains as NTSC.
Change PAL60 or NTSC output when	PAL60: NTSC discs can be viewed on PAL TV.
you play NTSC discs.
STILL MODE	AUTO
Specify the type of picture shown	FIELD: The picture is not blurred, but the picture quality is lowered.
when in pause mode.	FRAME: Overall quality is high, but the picture is blurred.
VIDEO OUT (I/P)	INTERLACE
Select “PROGRESSIVE” only if	PROGRESSIVE
connecting to a progressive output	When you select “PROGRESSIVE”, a message screen will appear.
compatible TV.	For progressive output, press [R] and then press [OK].
	To cancel, press [	, RETURN].

VKX80_GC_1En.indd 20 9/22/2010 2:34:46 PM