External unit (continued)
➡Page 3 for the buttons position of remote control and main unit.
Changing the main unit and remote control mode
The remote control and main unit are
To switch to “REMOTE 2” mode
Press [FM/AM/MUSIC P.] to select “AM”.
(While pressing [FM/AM/MUSIC P.] on the main unit)
Press and hold [2] until “REMOTE 2” appears on the main unit display.
Press and hold [ENTER] and [2] for at least 2 seconds.
The main unit and remote control are now set to operate in “REMOTE 2” mode.
To return to “REMOTE 1” mode Perform steps 1 to 3 but use [1] instead of [2] for steps 2 and 3. (“REMOTE 1” appears on the main unit during step 2.)
The remote control cannot work with the main unit if their modes are different. “REMOTE 1” or “REMOTE 2” appears on the main unit when you operate the remote control.*
*If “REMOTE 1” appears (The main unit is in “REMOTE 1” mode.) Press and hold [ENTER] and [1] on the remote control for at least 2 seconds.
If “REMOTE 2” appears (The main unit is in “REMOTE 2” mode.) Press and hold [ENTER] and [2] on the remote control for at least 2 seconds.
Timer
Setting the time
This is a
Press [CLOCK/TIMER] to set the clock.
Press [u, 2] or [i, 1] to select the time within 5 seconds. (Press and hold to change the time faster.)
Press [CLOCK/TIMER] again.
g To display the clock when the unit | Press [CLOCK/TIMER] |
is on |
|
Note |
|
•The clock is accurate to within ±60 seconds a month. Readjust if necessary.
•Set again after disconnecting the AC power supply cord or power failure.
Play timer
You can set the timer to come on at a certain time to wake you up.
Preparation:
•Turn the unit on and set the clock.
•Prepare the music source (disc, radio, iPod or music port) and set the volume.
Press [CLOCK/TIMER] repeatedly to select play timer.
CLOCK 
zPLAY 
Original display
“ON TIME” is displayed. Within 5 seconds, press [u, 2] or [i, 1] to set the starting time.
Press [CLOCK/TIMER] to confirm.
“OFF TIME” is displayed. Repeat steps 2 and 3 to set the finishing time.
Sleep timer
The SLEEP timer can turn the unit off after a set time.
Press [SLEEP] to turn the SLEEP function on/off.
• Each time you press the button:
30MIN | 60MIN | 90MIN | 120MIN |
| OFF (Canceled) |
| |
|
| ||
g To check the remaining time | Press [SLEEP] once | ||
|
|
|
|
Note |
|
|
|
The play timer and sleep timer can be used together. The sleep timer always has priority. Be sure not to overlap timer settings.
RQTV0288
8
To activate the timer
Press [zPLAY] to turn on the timer. Press [^] to turn off the unit.
To | Action |
|
|
Change the settings | Repeat steps 1 to 4 and 6. |
|
|
Change the source or | Press [zPLAY] to clear zPLAY indicator |
volume | from the display. |
| Make changes to the source or volume. |
| Perform steps 5 and 6. |
|
|
Check the settings | Press [CLOCK/TIMER] repeatedly to select |
(when the unit is on or | zPLAY. |
in standby mode) |
|
|
|
Cancel | Press [zPLAY] to clear the timer indicator |
| from the display. |
|
|
Note |
|
•The timer will start at the preset time, with the volume increasing gradually to the preset level.
•The timer comes on at the set time every day if the timer is on.
•The unit must be in the standby mode for the timer to function.
•If you turn the unit off and on again while the timer is functioning, the finish time setting will not be activated.
•When MUSIC PORT or iPod is selected as the source when the timer comes on, the system turns on and engages MUSIC PORT or iPod as the source. If you wish to playback from the portable audio equipment, activate the equipment’s play mode and increase the volume. (See the
portable audio equipment’s instruction manual.)
