Panasonic SCEN38 Attach the stand to the unit, Connections, Placement of speakers

Attach the stand to the unit

➡Page 3 for the buttons position of remote control and main unit.

Support stand

(included)

Placement of speakers

Rear of the main unit

Insert the stand fully until a click sound is heard.

Ensure the stand is securely attached to the main unit for stabilization.

Note

•The supplied stand is specially designed for use with this unit.

•Only use as indicated in this setup.

Speakers are designed identically so that no left or right channel orientation is necessary.

Note

•Keep your speakers at least 10 mm (13/32”) away from the system for proper ventilation.

•These speakers do not have magnetic shielding. Do not place them near televisions, personal computers or other devices easily influenced by magnetism.

•You cannot take the front net off the speakers.

Caution

•Use the speakers only with the recommended system. Failure to do so may lead to damage to the amplifier and/or speakers, and may result in the risk of fire. Consult a qualified service person if damage has occurred or if you experience a sudden change in performance.

•Do not attach these speakers to walls or ceilings.

Connections

1Speakers

Red Black

2

Red (+)

1

Headphones (not included)

Reduce the volume level and connect the headphones.

Plug type: 3.5 mm (1/8”) stereo

Note

To prevent hearing damage, avoid listening for prolonged periods of time.

Black (-)

2FM/AM antenna

Stand the antenna up on its base.

Taped part

FM antenna

AM antenna

Unplug the antenna connector by holding the taped part.

3AC power supply cord

Connect the AC power supply cord after all other connections are complete.

		To household AC outlet
	Conserving power
	The unit consumes 2.6 W even it is turned off with
	[8, POWER]. To save power when the unit is not to be
	used for a long time, unplug it from the household AC
RQTV0288	outlet.
	Remember to reset the radio stations and any other
	memory items before using the unit again.
	Note

4If the unit is left unplugged for longer than approximately two weeks, all settings will revert to the factory settings.

	1
2	3

PC Sync

Connect your PC to the PC Sync port.

➡Refer to page 7 for further information.

iPod connection

Insert your iPod into the Built-in iPod Dock.

➡ Refer to page 7 for further information.

Portable audio equipment (Cords and equipment not included)

Portable audio player	Plug type: 3.5 mm (1/8”) stereo
	MAIN UNIT REMOTE CONTROL
Start playback from the portable	➡
audio source.

Note

•Adjust the volume and sound quality of this unit and the other equipment.

•For details, refer to the instruction manual of the other equipment.