Getting started
Making the connections
1Prepare the setting stand.
2Install the unit on the setting stand.
Align and put the unit on the setting stand, turn the screw clockwise to secure the unit.
3Connect the AC mains lead.
For the United Kingdom and Kuwait
READ THE CAUTION FOR AC MAINS LEAD ON PAGE 3 BEFORE CONNECTION.
The system consumes approximately 0.2 W when it is in standby mode.
To household mains socket
Do not use an AC mains lead from other equipment.
Note:
•Do not sit on top of the unit.
•Some settings return to default when you disconnect the system.
•These speakers do not have magnetic shielding. Do not put them near TVs, PCs or other equipment easily influenced by magnetism.
•Do not remove the speaker nets.
•Hold the unit firmly when moving it. Do not hold the setting stand.
Preparing the remote control
Before using
Remove the insulation sheet.
Replacing the battery
Replace with a new battery (CR2025 lithium battery).
1While pressing the stopper, pull out the battery holder.
2Insert a new battery with the (+) side facing up.
3Push the battery holder back fully.
CR2025
RQT9648
4
4