Basic playback
1Press [`] to turn on the system.
2Insert the iPod/iPhone.
Status indicator: Green
3Press [4/9] to start playback.
Pause | Press [4/9]. |
playback | Press again to continue playback. |
Skip track | Press [2] or [6]. |
Search track | Press and hold [2] or [6]. |
View iPod | Press [iPod MENU]. |
menu |
|
Select an item | Press [R, T] and then press [OK]. |
|
|
Note:
•After you insert the iPod/iPhone, the system will check the connection and the green status indicator blinks.
•Depending on the model, it may be necessary to remove the iPod/iPhone and select the album, artist, etc. on the iPod/iPhone.
•The system automatically switches on when you connect an iPod/iPhone that is in playback mode (except for some models).
•Operation results may vary depending on the iPod/ iPhone models.
•Read the User Guide of the iPod/iPhone for the operating instructions.
Compatible iPod/iPhone (as of February 2012)
Update your iPod/iPhone with the latest software before using this system.
iPod touch
1st, 2nd, 3rd and 4th generation
iPod nano
2nd, 3rd, 4th, 5th and 6th generation
iPod classic
iPhone 4S / iPhone 4 / iPhone 3GS / iPhone 3G / iPhone
For up to date compatibility information, refer to http://panasonic.jp/support/global/cs/
Charging an iPod/iPhone
An iPod/iPhone is charged automatically when connected to the system (even when the system is in standby mode).
•See the iPod/iPhone display for its battery charging status.
•Disconnect the iPod/iPhone if it is not used for an extended period of time after charging is complete.
•Charging stops when the battery is fully charged. The battery will deplete naturally.
Using the auxiliary input
You can connect a portable audio equipment and listen | ENGLISH | |
to the audio through this system. | ||
Preparation | ||
| ||
Switch off the equalizer (if any) of the portable audio |
| |
equipment to prevent sound distortion. |
| |
Decrease the volume of the system and the portable |
| |
audio equipment before you connect or disconnect the |
| |
portable audio equipment. |
|
Audio cable |
|
(not supplied) | Portable audio equipment |
| (not supplied) |
1Connect the portable audio equipment.
Plug type: Ø 3.5 mm stereo
2Press [iPod/AUX] to select AUX mode.
Status indicator: Off
3Play the portable audio equipment.
Note:
•Read the operating instructions of the portable audio equipment for details.
•Components and cables are sold separately.
To adjust the audio input level
Press [INPUT LEVEL].
Normal (default) ↔ High
Note: | RQT9648 | |
• | you have increased the volume. | |
Select “High” if the output level is too low even when |
| |
• | Select “Normal” if there are abnormalities or the sound | 7 |
| is distorted during “High” input level. | |
|
| 7 |