13
RQT9754
ENGLISH
Bluetooth® operations
By using the Bluetooth® connection, you can listen to the sound from the Bluetooth® audio device from this
unit wirelessly.
Preparation
≥Turn on the Bluetooth® feature of the device and
place the device near this unit.
≥If this unit is already connected to a Bluetooth®
device, disconnect it.
1Press [ ] to select “BLUETOOTH”.
≥If “PAIRING” is indicated on the display, go to step 3.
2Press [PLAYMENU] to select “NEW DEV.” and
then press [OK].
{. “PAIRING” is indicated on the display.
3Select “SC-HC58” from the Bluetooth® device’s
Bluetooth® menu.
4Start play on the Bluetooth® device.
≥Refer to the operating instructions of the Bluetooth®
device for details.
If prompted for the passkey, input “0000”.
≥You can register up to 8 devices with this unit. If a 9th
device is paired, the device that has not been used for
the longest time will be replaced.
Preparation
≥Turn on the Bluetooth® feature of the device and
place the device near this unit.
≥If this unit is already connected to a Bluetooth®
device, disconnect it.
1Press [ ] to select “BLUETOOTH”.
{. “READY” is indicated on the display.
2Select “SC-HC58” from the Bluetooth® device’s
Bluetooth® menu.
{. The name of the connected device is indicated on
the display for 2seconds.
3Start play on the Bluetooth® device.
≥This unit can only be connected to one device at a time.
≥When “BLUETOOTH” is selected as the source, this unit
will automatically try and connect to the last connected
Bluetooth® device. The Bluetooth® device will be
disconnected if a different audio source (e.g., [CD]) is
selected.
You can change the transmission speed to prioritize
transmission quality or sound quality.
Preparation
≥Press [ ] to select “BLUETOOTH”.
≥If a Bluetooth® device is already connected,
disconnect it.
1Press [PLAY MENU] repeatedly to select
“LINK MODE”.
2Press [3,4] to select the mode and then
press [OK].
MODE 1: Emphasis on connectivity
MODE 2: Emphasis on sound quality
≥The default setting is “MODE1”.
If the sound input level of the Bluetooth®
transmission is too low, change the input level
setting.
Preparation
≥Connect a Bluetooth® device.
1Press [PLAY MENU] repeatedly to select
“INPUT LEVEL”.
2Press [3,4] to select the level and then press
[OK].
“LEVEL 0” ,. “LEVEL i1” ,. “LEVEL i2”
^---------------------------------------------------------------J
≥Select “LEVEL0” if the sound is distorted.
≥The default setting is “LEVEL0”.
1While a Bluetooth® device is connected:
Press [PLAYMENU] to select
“DISCONNECT?”.
2Press [3,4] to select “OK? YES” and then
press [OK].

Pairing Bluetooth® devices

Connecting a paired Bluetooth®

device

Bluetooth® transmission mode

Bluetooth® input level

Disconnecting a Bluetooth® device

SC-HC58~RQT9754.book Page 13 Tuesday, December 18, 2012 4:40 PM