15
RQT9754
ENGLISH
Listening to the radioYou can preset up to 30 channels.
Preparation
≥Make sure that the FM antenna is connected.
(l6)
≥Turn the unit on.
≥Press [RADIO] to select “FM”.
A station previously stored is overwritten when another
station is stored in the same channel preset.
1Press [PLAY MENU] to select “A.PRESET”.
2Press [3,4] to select “LOWEST” or
“CURRENT” and then press [OK].
LOWEST:
To begin auto preset with the lowest frequency
(FM 87.9 or FM 87.5).
CURRENT:
To begin auto preset with the current
frequency.*
* To change the frequency, refer to “Manual tuning and
presetting”.
The tuner starts to preset all the stations it can
receive into the channels in ascending order.
Preparation
1Press [PLAYMENU] repeatedly to select
“TUNEMODE”.
2Press [3,4] to select “PRESET” and then
press [OK].
Press [:/6] or [5/9] to select the
channel.
∫Manual tuning and presetting
Select a radio broadcast.
1Press [PLAYMENU] repeatedly to select
“TUNEMODE”.
2Press [3,4] to select “MANUAL” and then
press [OK].
3Press [:/6] or [5/9] to tune to the
required station.
≥To start automatic tuning, press and hold
[:/6], [5/9] until the frequency starts
scrolling. Tuning stops when a station is found.
To preset the channel
4While listening to the radio broadcast
Press [OK].
5Press [3,4] to select the channel and then
press [OK].
∫To improve FM sound quality
1While receiving FM broadcasts, press
[PLAYMENU] repeatedly to select “FM
MODE”.
2Press [3,4] to select “MONO” and then press
[OK].
≥This setting can be preset and memorized. To do
so, continue to step 4 of “Manual tuning and
presetting”.
≥Select “STEREO” in step 2 to return to stereo
broadcasts.
≥“MONO” is canceled if the frequency is changed.
≥If “MONO” is selected, regardless of the type of signal
this unit is receiving, “FM MONO” is displayed when
[DISPLAY] is pressed. (lbelow)
∫To display the current signal status
Press [DISPLAY].
≥“STEREO” is displayed when this unit tunes to a stereo
broadcast.
Presetting stations automatically
Listening to a preset channel
“FM ST”: The FM signal is in stereo.
“FM”: The FM signal is in monaural.
≥“FM” is also displayed even if this unit is not
tuned to a station.
SC-HC58~RQT9754.book Page 15 Tuesday, December 18, 2012 4:40 PM