25
RQT9754
ENGLISH
3Attach the wall mount bracket to the wall with
2 screws (not supplied). (Both sides)
≥Use a level to ensure both wall mount brackets are
level.
4Fix the safety holder onto the unit with the
screw (supplied).
{. Screw tightening torque: 50 N0cm (0.4lbf0ft) to
70 N0cm (0.5 lbf0ft).
5Attach the fall prevention cord (not supplied) to
this unit.
6Hook the unit securely onto the wall mount
brackets with both hands.
≥Connect the FM antenna and the AC power supply
cord to the unit before hanging the unit onto the
wall. (l6)
≥After hanging the unit, release your hands carefully
to confirm the unit sits securely on the wall.
7Drive the safety holder fixing screw
(not supplied) to secure the safety holder onto
the wall.
≥Refer to step 3 for requirements before screwing.
8Attach the fall prevention cord (not supplied) to
the wall.
≥Make sure that the slack of the cord is minimal.
300 mm (1113/16q)
232mm (9 7/8q)
700mm (27 1/2q)
66 mm
(2 5/8q)
202mm (8q)
125mm (4 7/8q)
143mm
(55/8q)
500mm (19 5/8q)
118 mm
(45/8q)
30mm
(11/8q)
Space required
At least 30mm (1 3/16q)
‰7.5 mm (19/64q)
to
‰9.4 mm (3/8q)
‰4mm
(5/32q)Wall mount bracket
Screw
(supplied)
Cord (not supplied)
Wall
Safety holder fixing screw
(not supplied)
Safety holder
Fixed to the
wall
Cord (not supplied)
Screw eye (not supplied)
Wall
RQT9754~body1_mst.fm Page 25 Thursday, December 20, 2012 11:52 AM