14 RQT9670
≥For a safety measure to prevent the speakers from falling, refer to page 17.
≥To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.
Assemble the speakers following steps 1 and 2 of “Place the speakers
horizontally” (>10).
Attach the stands.
≥Use the “Panasonic” logo to identify the top and bottom of the speaker.
≥Keep the screws out of reach of children to prevent swallowing.
When placing the speakers on a table
Place the speakers using the stands
∏2 Speakers ∏2 Speaker cables
(L): WHITE
(R): RED
∏1 Speaker joint
∏2 Stands ∏6 Screws
AScrew (supplied)
BScrew hole
Align the holes with the projecting parts on the speaker.
≥Do not use the lower holes for the alignment. If these holes
are used, the screw does not fit.
SC-HTB351_RQT9670_mst.book Page 14 Thursday, December 29, 2011 1:39 PM