Getting started
RQT9670 9
Use a screwdriver (i) for assembling the speakers.
Do not hold the speakers in one hand to avoid injury, you may drop the speakers when carrying them.
When carrying the active subwoofer
To avoid interference, maintain the following distances between the main unit/active subwoofer
and other electronic devices that use the same radio frequency (2.4 GHz and 5 GHz band).
Place the active subwoofer within a few meters of the main unit and in a horizontal position with the top panel faced upward.
Do not use the main unit or active subwoofer in a metal cabinet.
Placing the active subwoofer and the speakers too close to the walls and corners can result in excessive bass. Cover walls
and windows with thick curtains.
If irregular coloring occurs on your TV, turn the TV off for about 30 minutes. If it persists, move the speakers further away from
the TV.
Keep magnetized items away. Magnetized cards, watches, etc., can be damaged if placed too close to the active subwoofer
and the speakers.

Caution

This system is to be used only as indicated in these instructions. Failure to do so may lead to damage to the
amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified service person if damage
has occurred or if you experience a sudden change in performance.
Do not attempt to attach these speakers to a wall using methods other than those described in this manual.

Speaker system

When attaching the speakers to a wall

The wall or pillar on which the speakers are to be attached should be capable of supporting 33 kg (72.8 lbs) per screw.
Consultation with a qualified installation specialist is recommended when attaching the speakers to a wall. Improper attachment
may result in damage to the wall and speakers, and personal injury.

When placing the speakers in front of the TV

The speakers may block or interfere with the TV’s various sensors (C.A.T.S. (Contrast Automatic Tracking System) sensor,
remote control sensor, etc.) and the 3D Eyewear transmitters on a 3D compatible TV.
If the stands are being used
Move the speakers further away from the TV. If the TV still does not function properly, try removing the stands.
If the stands are not used
Move the speakers further away from the TV. If the TV still does not function properly, try placing them beside the TV (>8).

Active subwoofer

ADo not hold the active subwoofer from this
opening.
The parts inside (speaker unit) may be damaged.
BAlways hold the bottom of the active subwoofer when
moving it.

Wireless interference

CMain unit/active subwoofer
DWireless LAN: approx. 2 m (6 1/2 ft)
ECordless phone and other electronic devices:
approx. 2 m (6 1/2 ft)
A
B
D
E
C
SC-HTB351_RQT9670_mst.book Page 9 Tuesday, March 6, 2012 7:22 PM