6RQT9670
Control reference guide
1Standby/on switch (Í/I)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
2 Adjust the volume of the speakers
3 Select the input source
“TV”#“BD/DVD”#“AUX”
^------------- “”(-----------}
4 Remote control signal sensor (>7)
5 Input selector indicators§1
ATV indicator
Lights green when the TV is the audio
source
BBD/DVD indicator
Lights amber when the device connected
to the BD/DVD terminal is the audio
source
CAUX indicator
Lights amber when the device connected
to the AUX terminal is the audio source
DBluetooth® indicator
Lights blue when the Bluetooth® device is
the audio source
6 Audio format indicators§1
EDolby Digital indicator
Lights when Dolby Digital is the current
audio format
FDTS indicator
Lights when DTS is the current audio
format
GPCM indicator
Lights when PCM (2ch, Multi-channel) is
the current audio format
7 WIRELESS LINK indicator (>21)
1 AC IN terminal (>20)
2 Speaker terminals (>20)
3 TV terminal (>19)
4 BD/DVD terminal (>19)
5 AUX terminal (>19)
6 Active subwoofer on/off button
§1 The indicators will also blink in various conditions (>28)
§2 The I/D SET button is only used when the main unit is not paired with the active subwoofer (>27)
Main unit and active subwoofer (Front)
7
12
56
3
4
Main unit Active subwoofer
Main unit and active subwoofer (Rear)
1
2134
6
SPEAKERS
6
R L
DIGITAL
AUDIO
IN
TV
(OPT1)
BD/DVD
(OPT2)
AC IN
AUX
RL
5
SC-HTB351_RQT9670_mst.book Page 6 Thursday, December 29, 2011 1:39 PM