Operating Instructions
Editing MDs
DIVIDE (Dividing a track into two)
This allows you to add track marks, making it easy to divide a classical piece into its separate movements, for example.
Operation
Refer to the illustration on page 45 of the Japanese text.
1Press [EDIT, MARK MODE] during play.
21Press [:, 9] to select
“DIVIDE?”.
2Press [ENTER] at the point you want to divide the track.
A 4 second segment (8 seconds if the track is monaural or recorded with LP2, 16 seconds if the track is recorded with LP4) of the track is played repeatedly, beginning at the point selected.
∫To adjust the point
Press or swipe [:! , #9] to adjust the point.
Adjustments can be made approximately 8 seconds (16 seconds if the track is monaural or recorded with LP2, 32 seconds if the track is recorded with LP4) either side of the original point.
3Press [ENTER].
The display asks you to confirm your selection.
4Press [EDIT, MARK MODE].
When “UTOC Writing” goes out editing is complete and the unit stops.
∫To stop part way through an editing operation
Press [∫, OPR OFF] before confirming the operation in step 4.
Note
≥If you divide a track with a title, the latter track becomes untitled.
≥DIVIDE cannot be used while the unit is stopped.
RQT5997
84
MOVE (Moving tracks)
Rearrange the order of the tracks.
Operation
Refer to the illustration on page 46 of the Japanese text.
1 Press [EDIT, MARK MODE] while stopped.
21Press [:, 9] to select “MOVE?”. 2Press [ENTER].
Now the display is in the mode to select track to be moved.
31Press or swipe [:! , #9] to
select the track to be moved.
2Press [ENTER].
Now the display is in the mode to select the new position.
41Press or swipe [ :! , #9]
again to select the new position.
2Press [ENTER].
The display asks you to confirm your selection.
5Press [EDIT, MARK MODE].
When “UTOC Writing” goes out editing is complete and the unit stops.
To stop part way through an editing operation
Press [∫, OPR OFF] before confirming the operation in step 5.
ALL ERASE (Erasing tracks)
Erase all the tracks on the MD.
Operation
Refer to the illustration on page 47 of the Japanese text.
1 Press [EDIT, MARK MODE] while stopped.
21Press [:, 9] to select “ALL
ERASE?”.
2Press [ENTER].
The display asks you to confirm your selection.
3Press [EDIT, MARK MODE].
When “UTOC Writing” goes out editing is complete and the unit stops.
(“BLANK DISC” appears on the display.)
∫To stop part way through an editing operation
Press [∫, OPR OFF] before confirming the operation in step 3.
Note
ALL ERASE cannot be used while the disc is playing or paused.
TRACK ERASE
Erase one track at a time.
Operation
Refer to the illustration on page 48 of the Japanese text.
1 Press [EDIT, MARK MODE] while stopped.
2 1Press [:, 9] to select “TRACK
ERASE?”.
2Press [ENTER].
Now the display is in the track selection mode.
31Press or swipe [:! , #9] to select the track to erase.
2Press [ENTER].
The display asks you to confirm your selection.
4Press [EDIT, MARK MODE].
When “UTOC Writing” goes out editing is complete and the unit stops.
∫To stop part way through an editing operation
Press [∫, OPR OFF] before confirming the operation in step 4.
COMBINE (Combining 2 tracks)
Remove a track mark from between two tracks, effectively making them one track.
Operation
Refer to the illustration on page 49 of the Japanese text.
1 Press [EDIT, MARK MODE] while playing the latter of the two tracks you want to combine (or while paused).
2 1Press [ :, 9] to select “COMBINE?”.
2Press [ENTER].
The display asks you to confirm your selection. In the example, the last eight seconds of track 2 and the first eight seconds of track 3 play repeatedly. (16
seconds if the track is monaural or recorded with LP2, 32 seconds if the track is recorded with LP4)
3Press [EDIT, MARK MODE].
When “UTOC Writing” goes out editing is complete and the unit stops.
∫To stop part way through an editing operation
Press [∫, OPR OFF] before confirming the operation in step 3.
Note
≥COMBINE does not work while playing track 1.
≥You cannot combine tracks recorded using different modes (monaural, normal stereo, LP2, and LP4).
GROUP (Grouping tracks)
You can do the following
≥Group set
Group together successive tracks and give groups titles
≥Group title Change group titles
≥Group release
Release tracks from a group
Operation
Refer to the illustration on pages 50 to 54 of the Japanese text.
1 Press [EDIT, MARK MODE] while stopped.
2 1Press [:, 9] to select “GROUP?”.
2Press [ENTER] .
Now the display is in the function selection mode.
31Press to select the function.
The mode changes each time the button is pressed.
SET? 
;;
TITLE?
;;
RELEASE? 
2Press [ENTER] .
Refer to operation you selected.
≥GROUP SET
After step 3 above
The display is ready for you to select the first track in the group.
41Press or swipe [:! , #9] to select the first track.
2Press [ENTER].
The display is ready for you to select the last track in the group.
51Press or swipe [:! , #9] to select the last track.
2Press [ENTER].
The number of the new group is displayed.
AfterAfter 22 secondsseconds
The text editing mode is entered.
6Enter the title. (See page 86.)
7Press [EDIT, MARK MODE].
When “UTOC Writing” goes out editing is
complete and the unit stops.
∫To stop part way through an editing operation
Press [∫, OPR OFF] before confirming the operation in step 7.
RQT5997ENGLISH
85
