Panasonic SL-CT790 Sequential Play, Follow steps, Indication, Removing discs

Models: SL-CT790

1 8
Download 8 pages 20.32 Kb
Page 4
Image 4

Sequential Play

Basic Play

12 R L

 

EQ MODE MEMORY

OPEN

3

 

HOLD

Label must face

upward. Press near the center so the disc clicks firmly into place.

Close the lid.

5

SL -

CT790

P

O

RTA

B

L

E

C

D

P

L

A

Y

E

R

O

P

E

N

H

O

LD

 

CHG

VOL

Plug type:

4

 

3.5 mm

 

(1/8 in.) stereo

 

Remote control

HOLD

HOLD

Remote control

(Beep)

MODE MEMORY

VOL

Decrease

VOL

Remote control

 

(Beep)

Increase

Increase

MODE MEMORY

Track number in play

 

 

(Beep)Decrease

S-XBS

Elapsed playing time of each track

S-XBS

Follow steps 1–5.

In step 2: Connect the stereo headphones/earphones and wired remote control to the headphone jack [Ë]. (Plug in firmly.)

In step 5: The volume range is 0-25. (Press and hold to change the volume successively.)

In step 5: The volume changes when pressed while the level is displayed. If any other display is shown, it changes to show the current level. (The volume returns to 10 when you dis- connect the power source.)

Note!

Play stops automatically when all the tracks have been played.

If the unit has been connected to the car audio sys- tem, set this unit’s volume to 10, then adjust the vol- ume level on the system.

Auto-off function

If you leave the unit in stop mode for about 10 minutes, (30 seconds if a disc is not loaded) it turns off to save the batteries.

4

Resume function

The player stores the track where you stopped play and if you press [1/;] (main unit) or [1/] (remote control), play resumes from the beginning of that track.

Note!

Opening the lid while in the stop mode or replacing the disc while in the off mode cancels the function. (It may remain active if you replace a disc in the off mode.)

Play may resume from the beginning of the next track if you stopped play near the end of a track.

The resume function is automatic and you cannot turn it off.

For your reference: “)” indication

This indication appears for about 30 seconds if [1/;] (main unit) or [1/] (remote control) is pressed when no disc is loaded in the unit or if the disc is not properly secured.

*” indication

This indication appears for about 10 minutes when the lid is opened. (However, the indication does not appear when the unit is powered off.)

Removing discs

1Press [] to stop play and disc rotation.

2Slide [OPEN] to open the lid.

3Once the disc has stopped, lift the disc out with your finger in the depression.

Do not stop the disc by hand or try to remove it before it stops rotating. This can damage CDs.

Depression

Note!

Never insert foreign objects into the unit.

Note on CD-R and CD-RW

This unit can play CD-DA format audio CD-R and CD-RW that have been finalized§ upon completion of recording. It may not be able to play some CD-R or CD-RW due to the condition of the recording.

§Finalizing is a process that enables CD-R/CD-RW players to play audio CD-R and CD-RW.

Page 4
Image 4
Panasonic SL-CT790 operating instructions Sequential Play, Follow steps, Indication, Removing discs