Panasonic SL-CT790 Anti-Skip System, When using batteries, Using the remote control

Operation	Unit		Remote control				Display/reference
	Press during play.	You cannot pause with the remote control.
To pause play							S-XBS
	Press again to restart play.
	Press during play.	Press during play.
							Total number of tracks Total playing time
To stop play		(Beep...Beep)		EQ	MODE MEMORY
Stop mode	Resume function	Resume function					S-XBS
	Play starts from the beginning of
	the current track the next time you	Play starts from the beginning of the current track
	press [1/;].	the next time you press [1/∫].
	Press during stop mode.	Press	and hold				No indicator is shown
		during	play or
To turn off the
		stop mode.
unit Off mode		(Beep...Bee...p)		EQ	MODE MEMORY
	The resume function remains active.	The resume function remains active.
	Press during play.	Press during play.					≥During program play (page 6), these buttons are
Skipping	(Press [:] twice to skip to the	(Press [:] twice to skip to the beginning of the					used to skip forward or backward through the pro-
tracks	beginning of the previous track.)	previous track.)					grammed sequence of tracks.
							≥You cannot skip to tracks that have been played in
	Backward Forward
							random or random repeat play (page 6).
			EQ	MODE	MEMORY		≥During program play, random play, random repeat
Searching							play or 1-track repeat play (page 6), search opera-
				Backward		Forward	tion is limited to the current track only.
through tracks
				(Beep Beep Beep)		(Beep Beep)
	Press and hold during play.	Press and hold during play.

Using the remote control

When using batteries

∫Operation confirmation tones

This tone sounds when a button on the remote control is pressed. Refer to the parentheses in the illustrations for the different types of confirmation tones.

∫Turning the operation tone on and off

While stopped or during play

Press and hold [EQ] for 5 seconds until the display ap- pears.

The tone sounds when the setting is changed.

EQ MODE MEMORY

To turn the tone on

S-XBS

To turn the tone off

∫The display light

The light in the remote control’s display comes on for about 5 seconds when you press a button, unless the hold function is on.

To check the current display

Change the position of the hold switch. The light comes on for about 5 seconds.

This unit includes a mechanism that extends the life of the batteries by varying the rotation rate of the motor. Motor noise may increase when the rate changes.

If the noise bothers you

Use the AC adaptor to power the unit. The rotation rate does not change while you are using the AC adaptor.

S-XBS

Anti-Skip System

This system deals with skipping in a variety of ways:

≥The thinner and lighter construction makes the unit less susceptible to vibration.

≥An anti-skip mechanism prevents skipping caused when play speed changes due to swinging of the unit.

≥A recovery system immediately returns the laser pick- up to its original position if it is knocked off the track by a strong shock.

≥An anti-skip memory (max.48 seconds) fills in interrup- tions caused by bumps and vibrations.

The anti-skip system works automatically while the system is on and cannot be canceled.

When bumps continue repeatedly

The elapsed playing time disappears and sound is inter- rupted.

S-XBS

Note!

≥The anti-skip memory compresses digital signals.

≥While the system is on, the disc rotates at a higher rate than usual in collecting extra audio data. This could result in a slight increase in disc rotation noise.

5 RQT6154