2.2.2Improving buttons
When correctly set up, the remote control should be able to operate all your devices. However, when using the remote control for the first time it might occur that some buttons do not yet function as expected.
In this case you can have the remote control search for alternatives.
Note
Improving buttons is not possible when the code was found during full database search (with code ‘9, 9, 9, 9’).
During initial setup
1 Make sure the receiving device is able to respond. E.g. when you try to repair the Play button for your DVD player, make sure to insert a DVD into the DVD player otherwise the Play button is not able to function.
2 Press the button that does not function, keep it pressed and immediately release it when the device responds. Repeat this for every button that does not function.
•If the button still does not function as expected, try pressing it again for a longer period of time.
After initial setup
1 Make sure the receiving device is able to respond.
E.g. when you try to repair the Play button for your DVD player, make sure to insert a DVD into the DVD player otherwise the Play button is not able to function.
2 Select the device that you wish to operate (e.g. DVD). Press the 
device selection button to select DVD.
3 Keep buttons
and 
pressed simultaneously for 5 seconds.
• The red Setup
light 
lights
up.The remote control is now in setup mode.
4Press and hold the button that does not
| function and immediately release it when | ||
| the device responds. |
| |
• | If the button still does not function as | ||
| expected, try pressing it again for a longer | ||
5 | period of time. |
| |
Press the |
| ||
| device selection |
| |
| button twice to save |
| |
| your settings and |
| |
| exit setup mode. | 2 x | |
| • | When no | |
|
| ||
button is pressed for 5 minutes or more, the remote control will exit setup mode, automatically saving all your settings.
3Using the universal remote control
3.1Buttons and functions
The illustration on page 8 gives an overview of all buttons on the remote control.Try out the buttons you need for operating your devices.
Notes
•Buttons having the same functions as the buttons on your original remote control may have different namings on the SRP1103 (e.g. Info / Display).
•Only functions that are available on your original remote control can be used for operating your devices with the SRP1103.
Using the universal remote control English
6 | EN | EN | 7 |
