27
For using SD-MovieStage

SD-MovieStage

The SD-MovieStage (supplied accessory) functions as follows.
≥MPEG4 moving pictures (ASF-format files) and still pictures (JPEG
pictures) recorded on the SD Multi AV Device are displayed in
thumbnail form and can be easily played back on a personal computer.
≥MPEG4 moving pictures (ASF-format files) can be Cut-edited.
≥Pictures recorded on other DV devices can be converted into those for
the SD Multi AV Device.
≥E-mails with moving pictures attached can be easily sent.
For using the SD-MovieStage software, refer to the PDF manual. This
manual describes installation only.

Operating environment

SD-MovieStage can be installed in a PC/AT compatible personal
computer which can run Microsoft® Windows® 98SE/Me/2000
Professional/XP.
Compatible machines:
PC/AT compatible PC with Microsoft Windows® 98 Second Edition/Me/
XP/2000 Professional pre-installed.(Intel® Celeron™300 MHz or higher
CPU)
Software
Microsoft Windows® Media™ Player 6.4 or higher
Microsoft Windows® Internet Explorer 5.0 or higher
Direct X 6.1 or higher
Graphic display:
High Colour (16 bit) or more.
Desktop resolution of 800X600 dots or higher.
Installed memory:
128 MB or more (for Windows® 98SE/Me)
256 MB or more (for Windows® 2000/XP)
Free hard disk space:
350 MB or more
Disk drive:
CD-ROM drive
Ports:
USB Terminal
Other requirements:
Mouse
≥First of all, read the [readme] file on the CD-ROM.
≥Microsoft and Windows are registered trademarks of Microsoft in the
United States and other countries.
≥Intel Pentium is a registered trademark.
≥Other names, company names, and product names printed in these
instructions are trademarks or registered trademarks of the companies
concerned.
≥The contents or complete reproduction or copy of these Operating
Instructions could be changed without notice.
≥Although the screens in these Operating Instructions are shown in
English (Windows XP version) for the sake of example, other
languages are supported as well.
≥As an IEEE1394 terminal is not provided on the SD Multi AV Device,
transfer or editing of pictures using the IEEE1394 terminal is not
supported.