Panasonic SV-AV10U Playing back still pictures one by one Slide Show, Formatting the Card

	/ MENU	2
	MODE/ VOL	1
	VOL +	1,2
	-
	3
1
PLAY REC			SELECT
MPEG4	VOICE	PUSH/SET
PICTURE	MUSIC

2	CARD EDITING
	ERASE ALL FILES
		YES
	FILE PROTECTION
		YES
	DPOF SETTING	YES
	SLIDE SHOW	YES
	CARD FORMAT	YES
	PRESS MENU TO RETURN

	/ MENU	2
	MODE/ VOL	1
	VOL +	1,2,3
	-
	3
1	CARD EDITING
	ERASE ALL FILES
		YES
	FILE PROTECTION
		YES
	DPOF SETTING	YES
	SLIDE SHOW	YES
	CARD FORMAT	YES
	PRESS MENU TO RETURN
2

FORMAT WILL ERASE

ALL FILES

No RETURN

YES

Playing back still pictures one by one (Slide Show)

The recorded still picture in the Card can be played back like a Slide Show.

1Set the Operation Mode to [PLAY>>PICTURE] 1.

2Set the [SLIDE SHOW] on the [CARD EDITING] 2 Menu to [YES].

≥Slide show starts from the selected still picture.

≥All pictures are sequentially displayed, each for about 5 seconds, and the show stops at the last picture.

ªTo cancel the Slide Show

Press down the center of the Jog Lever 3 for about 2 seconds.

≥Press down the center of the Jog Lever once, and the playback will pause.

≥Playback time may take longer than usual depending on the picture. ≥The order and playback time of a slide show set on another device is

not applicable to this SD Multi AV Device (all pictures are played back).

Formatting the Card

If a Card becomes unreadable by the SD Multi AV Device, formatting it may make it reusable. Formatting erases all the data recorded on a Card. If additional cards are purchased it is advisable to format the card before it is used for the first time.

1Set the Operation Mode to [PLAY>>MPEG4], [PLAY>>PICTURE], or [PLAY>>VOICE].

2Set the [CARD FORMAT] on the [CARD EDITING] Menu 1 to [YES].

≥A verification message appears 2.

3Move the Jog Lever up or down to select [YES] and press down the center of the Jog Lever 3

≥Formatting is carried out.

≥By formatting, all data stored in the Card (e.g., still pictures, MPEG4 moving pictures, voice data, music data) is erased.

≥Format the Card on the SD Multi AV Device or on Panasonic Media Manager (supplied). A card formatted on a machine other than the SD Multi AV Device may not be used. A card formatted on the SD Multi AV Device may not be used on other machines. Format a card on the machine on which it is used.

≥If the write protection switch of the SD Memory Card is set to [LOCK], data cannot be erased.

≥When the Card is formatted, the files will be deleted, even if files are locked.

≥As formatting erases all the data, save the necessary data on a personal computer, etc. beforehand.

≥Format may take a little time. Wait until the ACCESS Lamp goes out. (The message [PLEASE WAIT] will be displayed.)

26