Opening and closing the door
Electric door lock
The machine is equipped with an electric door lock. The door can only be opened when the electrical supply to the machine is turned on, and the "On/Off" button is pressed.
To open the door
^Press the "Door" button in as far as it will go. At the same time, grip the handle and open the door.
After the first intake of water, the door remains locked and cannot be opened until the end of the program (except during the "Rinse" and "Drain" programs). The machine can be programmed to open during the "Drying" program, if desired.
Do not touch the heating elements. They remain hot for some time after the end of the program and can cause burns.
To cancel a program
If a program has to be canceled in an emergency, e.g. the program has been interrupted due to a fault, the door will have to be opened manually.
^Turn the program selector to the "Stop" f position. The program is canceled after approximately
2 seconds.
To close the door
^Lift the door upwards and push it until it clicks shut. Do not press the release catch while shutting the door.
10
