Operation
Turning on the lab washer
^Make sure the spray arms are not blocked.
^Close the door.
^Press the "On/Off" button to turn the machine on.
Starting a program
^Turn the program selector clockwise or counterclockwise to the desired program. Refer to the Program Guide for more details.
The wash temperature of the selected program is shown in the display (except for "Rinse" and "Drain").
The "Start" indicator will flash.
^Select the "Drying" button, if necessary.
^Press the "Start" button. The actual temperature is displayed.
The "Start" indicator will illuminate.
Drying
"Drying" may be selected as an additional feature once a program has been selected (except in the "Rinse" and "Drain" programs). Drying is phased over 10 minutes. The total running time of the program lengthens accordingly.
Once the program has started, all other programs are blocked. If the program selector is turned to another program during the running program, the values shown in the display disappear. The values appear again if the program selector is turned back to the running program.
^Press the "Display" button to alternate between elapsed time and actual time in the display during the program.
25
