Electrical connection
,All electrical work must be performed by a qualified person in accordance with local and national safety regulations.
The machine comes equipped for connection to a 208 V, 60 Hz, 3 phase power supply. It is equipped with a 6 ft. long, 12/4 AWG power cord, without a plug. A plug, rated for the required power which will fit the receptacle, is to be supplied by the electrician doing the installation. It should be connected to the main power supply.
Voltage: | 208 V, 3 phase |
Frequency: | 60 Hz |
Rated Load: | 6 kW |
Circuit breaker: | 3 x 20 A |
Black : connect to L1 (hot)
Red: connect to L2 (hot)
White: connect to L3 (hot)
Green: connect to GND (ground)
It can be converted to use a single phase power supply in accordance with the conversion and wiring diagram. The cord must be changed from a 12/4 AWG to a 10/3 AWG. Contact Miele Technical Service for more information
Voltage: | 208 V, 1 phase |
Frequency: | 60 Hz |
Rated Load: | 6 kW |
Circuit breaker: | 2 x 30 A |
^Connection should be made via a suitable isolator, with an "On/Off" button easily accessible for servicing work.
^A damaged power cord must only be replaced with a genuine Miele cord by a Miele service technician.
WARNING
THIS APPLIANCE MUST BE GROUNDED
46
