Operation
Changing a program
If the selected program has not yet been started:
^Turn the program selector to the new program.
^Select the "Drying" feature, if necessary.
^Press the "Start" button.
Program sequence display
The current step of a wash program is indicated by a program sequence display.
At the end of a program
When the "Complete" indicator illuminates, the "Start" indicator goes out and the display shows a "0", the program has ended. A buzzer will sound for 30 seconds. (The buzzer function can be changed; see "Programming special functions.")
Turning off
^Press in and release the "On/Off" button to turn the machine off.
Canceling a program
Once a program is running, it should only be canceled in extreme cases, e.g. when glassware is knocking against each other and has to be rearranged.
^Turn the program selector to "Stop". The program is canceled after
2 seconds.
^Open the door with the "Door" button.
Caution! Water and items in the machine may be hot. Danger of burning or scalding.
^Rearrange or remove the items (wear protective gloves where necessary.)
^Replenish powdered detergent if necessary.
^Close the door.
^Select the "Drain" program to allow the waste water to drain.
^Select and start the program.
26