Frequently asked questions
What if … | Possible fault | Fix |
water in the wash | This machine has a | – Remove the cause of |
cabinet is not heated, | resettable heater limiter | the fault. |
the program sequence | which will switch off the | – Remove the service |
lasts too long and a fault | heater in case of | panel (see "Electrical |
code appears in the | connection"). | |
display: "F01 - F02"? | be caused if large articles | – Press the reset button |
| cover the heating | on the right side of the |
| elements or if the filters in | |
| temperature sensor. | |
| the wash cabinet are | |
| If this switch trips | |
| blocked. | |
| repeatedly, contact the | |
|
| |
|
| Miele Technical Service |
|
| Department before |
|
| further use. |
a fault message is |
| – Turn the program |
caused by a possible |
| selector to "Stop" f |
malfunction? |
| (the fault code goes |
|
| out). |
|
| – Press the "On/Off" |
|
| button to turn the |
|
| machine off. |
|
| – Turn the machine on |
|
| again and reselect the |
|
| program. |
|
| If the fault code "F..." |
|
| appears in the display, |
|
| or if you experience |
|
| further difficulty, contact |
|
| the Miele Technical |
|
| Service Department. |
36