Programming special functions
Note
–Unoccupied program selector positions are displayed by a bar
–The programming level can be
scanned if the selector is in the "Stop" f position.
1.Selecting a second interim rinse
A second interim rinse can be programmed to improve interim rinsing in all programs (except "Rinse").
^Turn the program selector to "STOP" f.
^Turn the machine off.
^Press and hold "Display" and "Start". At the same time, turn the machine on with the "On/Off" button..
The displays shows the current program status "P...".
The "Fill/Drain" indicator lights.
^Press the "Drying" button once. "E01" appears in the display.
^Turn the program selector to the
The display shows either "50" or "51". "50" = without Interim rinse II.
"51" = with Interim rinse II.
^Press "Display" to change from "50" to "51" or vice versa.
^Press the "Start" button. "SP" appears in the display.
^Press the "Start" button again. The change has been saved.
^Please note the changed setting:
28
