38
Installing USB Driver
When the USB driver is installed, the SD Multi AV
Device will be recognized by the personal computer.
Do not connect the USB cable until the USB driver
has been installed.
≥Please read [Read before you install] before
installing the USB Driver.
1
11
1Insert the supplied CD-ROM into the
personal computer’s CD-ROM drive.
≥The launcher for installation is activated
automatically.
2
22
2Click [USB Driver].
3
33
3Click [Finish].
≥After rebooting the computer, the USB driver is
activated.
Installing SD-MovieStage
Ver.2.0
1
11
1Insert the supplied CD-ROM into the
personal computer’s CD-ROM drive.
≥The launcher for the installation is activated
automatically.
2
22
2Click [SD-MovieStage Ver.2.0].
≥When [SD-MovieStage Ver.2.0] screen
appears, click [Next].
3
33
3Read License Agreement carefully, and
click [Yes], if you accept the terms of the
agreement.
4
44
4Complete the installation according to
the message.
≥When the DirectX8. 1 setup screen appears,
install it according to the message. (Failure to
install DirectX8.1 disables you from using SD-
MovieStage Ver.2.0. )
≥After rebooting the computer, the SD-
MovieStage Ver.2.0 is enabled.
2
22
2
3
33
3
2
22
2
3
33
3