46
Notes & Precautions

ªCautions for Use

When you use your SD Multi AV Device
on a rainy or snowy day or on a beach,
make sure that no water or moisture
enters the SD Multi AV Device.
≥Water may cause the SD Multi AV Device
or Memory Card to malfunction.
(Irreparable damage may occur.)
≥If sea water splashes onto the SD Multi AV
Device, wet a soft cloth with tap water,
wring it well, and use it to wipe the camera
body carefully. Then, wipe it again
thoroughly with a soft dry cloth.
Keep the SD Multi AV Device away from
magnetized equipment (such as a
microwave oven, TV, video game
equipment, etc.).
≥If you use the SD Multi AV Device on or
near a TV, images or sounds may be
disturbed due to electromagnetic wave
radiation.
≥Do not use near a cell phone because
doing so may cause noise to adversely
affect the picture and sound.
≥Recording on the Memory Card may be
damaged, or images may be distorted by
strong magnetic fields created by
speakers or large motors.
≥Electromagnetic wave radiation generated
by a microprocessor may adversely affect
the SD Multi AV Device, causing the
disturbance of images and sounds.
≥If the SD Multi AV Device is affected by
magnetically charged equipment and does
not function properly, turn off the SD Multi
AV Device power and detach the Battery
or AC Adaptor and then connect the
Battery or AC Adaptor again. Thereafter,
turn on the SD Multi AV Device power.
Do not use your SD Multi AV Device near
radio transmitters or high-voltage lines.
≥If you record pictures near radio
transmitters or high-voltage lines,
recorded images or sounds may be
adversely affected.
Do not use the SD Multi AV Device for
surveillance purposes or other business
use.
≥If you use the SD Multi AV Device for a
long period of time, the internal
temperature increases and, consequently,
this may cause malfunction.
≥The SD Multi AV Device is not intended for
business use.
When you use your SD Multi AV Device
on a beach or similar place, do not let
sand or fine dust get into the SD Multi AV
Device.
≥Sand or dust may damage the SD Multi
AV Device. (Extra care should be taken
when inserting and removing the Memory
Card.)
Do not spray insecticides or volatile
chemicals onto the SD Multi AV Device.
≥If the SD Multi AV Device is sprayed with
such chemicals, its body may be
deformed and the surface finish may peel
off.
≥Do not keep rubber or plastic products in
contact with the SD Multi AV Device for a
long period of time.
Do not use benzine, thinner or alcohol
for cleaning the SD Multi AV Device.
≥The camera body may be deformed and
the surface finish may peel off.
≥Before cleaning, detach the Battery or pull
out the AC Main Lead from the AC Main
socket.
≥Wipe the SD Multi AV Device with a soft
dry cloth. To remove stubborn stains, wipe
with a cloth that is soaked in detergent
diluted with water, and afterward, finish
wiping with a dry cloth.
After use, be sure to take the Memory
Card out and detach the Battery from the
SD Multi AV Device or pull out the AC
Main Lead from AC Main socket.