Watching TV
Cable / Satellite / Fiber Optic box
Initial setting
1.Connecting
Select the wiring method connecting your box to the TV, AV IN or Antenna/Cable in.
Note:
●● HDMI will provide the best HD picture
2.Change INPUT 
INPUT
Press the INPUT button to select the proper connection. Wait for 2 seconds.
●● The menu choices vary depending on which input is selected.
3.Power on your Cable, Satellite or Fiber Optic box Use the box’s remote control to change channels.
●● If the box is connected to the TV using a COAX cable (Antenna/Cable in), then set the TV channel to CH3 or CH4. Note that the picture will not be in HD.
●●
●●
●●
●●
●●
CC/SAP is not available when watching TV with a Cable or Satellite box connected via HDMI.
If you have a High Definition box, ensure that it is outputting 720p or 1080i signal.
Tip: press the TV’s INFO button to verify.
Check your box’s “aspect” or “format” settings. It should be set to 16:9, Widescreen or Full.
If the audio volume is too low, check the box’s audio settings.
Contact your Cable or Satellite provider for instructions on any box settings.
- 15 -