Antenna / Cable service without a box
Initial setting
1.Connect coax
Connect a COAX wire from either an antenna or Basic Cable service to the TV’s “ANTENNA/CABLE IN” screw terminal.
TV (ANTENNA/CABLE IN)
Antenna
2.Scan the channel
MENU 
Menu > Setup > ANTENNA/Cable setup > ANTENNA/ Cable signal, Auto program
1)Select either Cable or Antenna programming source in ANTENNA/ Cable signal.
2)Select Auto program and then the appropriate scan mode: (All channels / Analog only / Digital only)
3)Start scanning.
●●
●●
The tuner setup menu (auto scan, etc.) is only available when INPUT is set to TV.
If no channels are found by the end of the scan, then check the following:
–Antenna’s position - or availability of Cable service.
–Cable, Satellite or Fiber Optic services with a box are typically connected to the TV’s A/V inputs, preferably HDMI, for best HD picture. In such a case, the channel scanning is not needed.
- 16 -