Panasonic TC-58AX800U, TC-65AX800U owner manual Attaching Ferrite core, Moving the TV

personal injury may result. Contact your nearest Panasonic Dealer immediately.

During set-up, make sure that all screws are securely tightened.

●If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong enough to support the TV, and it might fall over and become damaged, and personal injury may result.

When removing the pedestal, do not remove the pedestal by any methods other than the specified procedure. (p. 11)

●Otherwise, the TV and/or pedestal may fall over and become damaged, and personal injury may result.

■Moving the TV

Before moving the TV, disconnect all cables.

● Move the TV with at least two people. Support as shown to avoid injury by the TV tipping or falling.

Warning

●Do not place the TV on sloped, soft, cushioned or unstable surfaces, and ensure that the TV does not hang over the edge of the base.

Attaching Ferrite core

Be sure to attach the provided ferrite core to the Power code to reduce interference or electrical noise.

Back of the TV

∗ 1.2 ” (30 mm)

1Attach the ferrite to Power cord on the TV side as shown.

2Close the ferrite core until it clicks.

12English