Panasonic TC-L32C22, TC-L37C22 quick start Setup, Sub menu list

(Continued)

Menu list

Menu			Item	Adjustments/Configurations (alternatives)
				Sets the mode to select the channel with the Channel up/down button.
		Channel surf mode		(All/Favorite/Digital only/Analog only)
				• Favorite: Only channels registered as FAVORITE. (p. 16)
		Language		Selects the screen menu language.
		Clock		Adjusts the clock. (p. 14)
		ANT/Cable setup		Sets channels. (p. 13)
		Input labels		Selects the terminal and label of the external equipment. (p. 37)
			VIERA Link	Controls the equipment connected to HDMI terminals (Off/On) (p. 28)
		VIERA		“Power off link”, “Power on link”, “Energy saving mode”, “Unselected device energy save”
				• and “Default speakers” cannot be selected if “Off” is set.
			Power on link	Sets “Power on link” of the HDMI connected equipment (No/Yes) (p. 28)
		Link	Power off link	Sets “Power off link” of the HDMI connected equipment (No/Yes) (p. 28)
			Energy saving	Sets “Energy saving mode” of the HDMI connected equipment. (Quick start/Save) (p. 28)
		settings	mode
			device energy	(No (stay on)/Yes (with prompt)/Yes (no prompt))
			Unselected	Sets “Unselected device energy save” of the HDMI connected equipment. (p. 28)
			save
			Default speakers	Selects the default speakers (TV/Theater) (p. 28)
			Power save	Reduces screen brightness to lower power consumption. Eye-friendly for viewing in a dark
	Setup			room. (Standard/Saving)
		ECO/energy		• prior to the shut-off.
				To conserve energy, the TV automatically turns off when NO SIGNAL and NO OPERATION
				continue for more than 10 minutes. (Stay on/Power TV off)
				Note
			No signal for 10	Not in use when “Auto power on”, “On/Off Timer” or “Lock” is set, or while “SD mode” or
				• “Digital Channel” is selected.
			minutes	“No signal for 10 minutes was activated” will be displayed for about 10 seconds when
				• the TV is turned on for the first time after the power was turned off by “No signal for 10
				minutes”.
		saving		The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes
				To conserve energy, the TV automatically turns off when no operation of remote and side
				panel key continues for more than 3 hours. (Stay on/Power TV off)
			No activity for 3	Note
				Not in use when “Auto power on” or “On/Off Timer” is set, or while “PC input” is selected.
			hours	• “No activity for 3 hours was activated” will be displayed for about 10 seconds when the TV
				• is turned on for the first time after the power was turned off by “No activity for 3 hours”.
				The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes
				• prior to the shut-off.
		Advanced setup	Image viewer	Turns TV On automatically when the cable box or a connected device is turned On (No/Yes)
				Set “Thumbnail” or “Slideshow” to play back SD cards automatically.
				TV AC cord must be plugged into this device. TV comes on every time the power is restored.
			Auto power on	• (p.The38)“Sleep” timer, “On / Off timer”, and “First time setup” will not function if “Auto power on” is set.
			auto play	(Slideshow/Thumbnail/Set later/Off)
		First time setup		Restart first time setup from “Language” setting. (p. 12)
		About		Displays TV version and software license.
		Reset to defaults		Performing Reset will clear all items set with Setup, such as channel settings.
	Sub menu list
Menu			Item	Adjustments/Configurations (alternatives)
Setup SUBMENU		Channel surf mode		Sets the mode to select the channel with Channel up/down button.
				(All/Favorite/Digital only/Analog only)
		Set favorite		Sets favorite channels. (p. 16)
		Edit CH caption		Changes the station identifier. (p. 35)
		Signal meter		Checks the signal strength if interference or freezing occurs on a digital image.

How to Use Menu Functions (picture, sound quality, etc.)

Advanced

25