Panasonic TCL47ET5 Attaching the pedestal to TV, Removing the pedestal from the TV, Rear view

Attaching the pedestal to TV

■Assembling the pedestal

Fix securely with assembly screws (Total 4 screws).

Tighten screws firmly.

A

Bracket	Hold the bracket
	not to fall over

FrontBase (Image)

■Set-up

Tighten assembly screws (total 4 screws) loosely at first, then tighten them firmly to fix securely.

Rear view

Rear side B

Arrow mark

	Arrow
	mark
Base	Hole for pedestal
	installation
	bracket
(Image)	Work on a flat surface

Removing the pedestal from the TV

Be sure to remove the pedestal in the following way when using the wall hanging bracket or repacking the TV.

Remove the assembly screws from the TV.

Lift the TV from the pedestal.

Remove the assembly screws from the bracket.

WARNING

Do not disassemble or modify the pedestal.

Otherwise, the TV may fall over and become damaged, and personal injury may result.

Caution

Accessories

Assembly screws (4 of each)

XSS5+15FNK size (M5 x 15)

XYN4+F25FJK size (M4 × 25)

Bracket (1)

TBL5ZA32821

Base (1)

TBL5ZX0268 (for 42”) TBL5ZX0270 (for 47”)

Do not use any pedestal other than that provided with this TV.

Otherwise, the TV may fall over and become damaged, and personal injury may result.

Do not use the pedestal if it becomes warped or physically damaged.

If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic Dealer immediately.

During set-up, make sure that all screws are securely tightened.

If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong enough to support the TV, and it might fall over and become damaged, and personal injury may result.

When removing the pedestal, do not remove the pedestal by any methods other than the specified procedure. (Above)

Otherwise, the TV and/or pedestal may fall over and become damaged, and personal injury may result.

9