Attaching the pedestal to TV

Assembly screws

Bracket

Base

(black) (4)

 

 

M5 × 14

Assembly screws

Cover

Spiral tube

(black) (8)

 

Cable binding instructions.

 

 

(p.15)

M4 × 10

Attaching the pedestal

1

A

C

E

D

2

B

3

 

 

B 4

Removing the pedestal from the TV

Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.

Remove the assembly screw from the cover.

Pull out the cover.

Remove the assembly screw from the TV.

Lift the TV from the pedestal.

Remove the assembly screws from the bracket.

Warning

Do not disassemble or modify the pedestal.

Otherwise, the TV may fall over and become damaged, and personal injury may result.

Caution

Do not use any pedestal other than that provided with this TV.

Otherwise, the TV may fall over and become damaged, and personal injury may result.

Do not use the pedestal if it becomes warped or physically damaged.

If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic Dealer immediately.

During set-up, make sure that all screws are securely tightened.

If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong enough to support the TV, and it might fall over and become damaged, and personal injury may result.

When removing the pedestal, do not remove the pedestal by any methods other than the specified procedure. (Above)

Otherwise, the TV and/or pedestal may fall over and become damaged, and personal injury may result.

(EN) - 10

Page 10
Image 10
Panasonic TC-L65WT600 owner manual Attaching the pedestal to TV, Assembly screws Bracket, Black