Panasonic TC-P50X1, TC-P42S1, TC-P50S1, TC-P46S1, TC-P42X1 Driver Reset Circuit Operation, Slide #49

Models: TC-P42X1 TC-P46S1 TC-P50S1 TC-P42S1 TC-P50X1

1 77
Download 77 pages 49.95 Kb
Page 49
Image 49
Driver Reset Circuit Operation

Driver Reset Circuit Operation

The DRV RST circuit of the A board is used to monitor the physical connection of the A board to the C board. DRV RST input to IC9500 and IC9003 must be high for the unit to operate. The A board provides the 5V source needed to power the C boards. On the C1 board and the C2 board, the 5V is routed back to the D board via connector C11/A31, C21/A32 to activate the 5V SENSE circuit. A voltage divider in the C1 board develops a voltage drop that causes the collector of transistors Q9301 to become low. As a result, the base voltage of Q9302 also becomes low causing its collector to go high. The output voltage is applied to IC9500 and IC9003 as DVR RST.

When the 5V SENSE circuit does not detect 5V from the C1 board and the C2 board, the DVR RST output becomes low. The unit goes into shutdown and the power LED blinks 6 times.

Slide #49

Page 49
Image 49
Panasonic TC-P50X1, TC-P42S1, TC-P50S1, TC-P46S1, TC-P42X1 manual Driver Reset Circuit Operation, Slide #49