Panasonic TC-P50G15 First Time Setup, Turn the TV On with the Power button, Auto channel setup

First Time Setup

“First time setup” is displayed only when the TV is turned on for the first time after the power cord is inserted into a wall outlet and when “Auto power on” (p. 36-37) is set to “No”.

or

Turn the TV On with the POWER button

or

(TV)(Remote)

*This setting will be skipped next time if you select “Home Use”.

Select your language

Language

English	Español	Français	select
			ok
Be sure to select “Home Use”
Please select your viewing environment			select
Home Use		Store Demonstration

Select “Home Use” when using this TV in your home.

ok

Please confirm your selection (Home Use) before pressing OK button.

■If you select “Store Demonstration” by mistake in , confirmation screen will be displayed.

You are selecting the mode for store demonstration		select
Yes	No

If you select “Yes”, the picture mode will regularly reset

to “Vivid” and a Picture Refresh message will be ok displayed on the screen.

Select “No” and return to previous screen .

If you select “Yes”, Screen enters store demonstration mode.

To display the “Please select your viewing environment” screen again as shown above and select “Home Use”, do one of the following:

•Press and hold down the front POWER button.

•Unplug the TV and plug it again.

Auto channel setup

Select “ANT/Cable setup”

■Press to exit from a menu screen

■Press to return to the previous screen

16

First time setup	next
Language
ANT/Cable setup	select
Network setting
VIERA CAST setting
Clock
Input labels

Select “ANT in”

ANT/Cable setup		set	ANT in
			Cable: Cable TV
ANT in	Cable
			Antenna: Antenna
Auto program
		select	Not used: Skip TV tuning
				go to

Select “Not used” when no wire is connected to the “Antenna/Cable” terminal. Typical when Cable/Satellite box is connected to a TV input.

Prevents accidental tuning to an unavailable signal.