Attaching the pedestal to TV
■Assembling the pedestal
Fix securely with assembly screws A (Total 4 screws).
Tighten screws firmly.
A |
|
Pole | A |
Base |
|
Accessories
Assembly screws
A
XYN5+F20FN (for 50”) size (M5 × 20) (Silver) (4)
THEL090N (for 55”)
size (M5 x 25) (Black) (4)
Front
Front
B
Attach pole cover with assembly screw C (only for 50”)
C
■Set-up
Carry out work on a horizontal and level surface.
Tighten assembly screws B (total 4 screws) loosely at first, then tighten them firmly to fix securely.
B | Bottom view |
| |
Arrow | Rear side |
| |
mark |
|
Arrow
mark
Hole for pedestal installation
Pole
Base
(Image:
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall hanging bracket or repacking the TV.
Remove the assembly screws B from the TV.
Pull out the TV from the pedestal.
Remove the assembly screw C from the cover (only for 50”).
Pull out the cover (only for 50”).
Remove the assembly screws A from the pole.
THEL088N (for 50”) THEL090N (for 55”) size (M5 x 25) (Black) (4)
C
XSB4+8FNK (for 50”) size (M4 x 8) (Black) (1)
Pole (1) (for 50”)
Poles (2) (for 55”)
L
R
●L or R is printed at the front of the poles.
Cover(1) (for 50”)
Base (1) (for 50”)
(for 55”)
Getting started Accessories/Optional Accessories
9
