Advanced PIP
1
2
3
4
Press to display the Setup menu.
Press to select “OSD Language”.
Press and hold until the Options menu is displayed. Press to select Advanced PIP.
5 | Press to adjust the menu. |
Off : Sets normal two screen display mode |
(see page 21).
On : Sets Advanced PIP mode.
Options1/3
Weekly Command Timer
Onscreen display |
| On |
|
|
|
Initial INPUT |
| Off |
|
|
|
Initial VOL level | Off | 0 |
|
|
|
Maximum VOL level | Off | 0 |
|
|
|
INPUT lock |
| Off |
|
|
|
Button lock |
| Off |
|
|
|
Remocon User level |
| Off |
|
|
|
Advanced PIP |
| Off |
| One screen | Advanced PIP |
|
|
6 | Press to exit from |
|
|
|
| Options menu. |
|
|
|
(When Advanced PIP is On) | Sub screen 1 Main screen | 2 | 3 | |
7 | Press repeatedly. |
|
|
|
| Each time pressing this | 6 | 5 | 4 |
Note:
button main picture and sub picture will be displayed as above.
To use 
, 
, 
, buttons for the screen operations, follow the procedures in the previous page.
Notes:
• Advanced PIP corresponding signal
Sub screen | Main screen |
NTSC, PAL, SECAM (tuner, video) | 640x480@60Hz, 852x480@60Hz, 1024x768@60Hz, |
525i, 525p, 625i, 625p, 750/60p, 750/50p, 1125/60i, | 1366x768@60Hz (RGB, DVI, HDMI) |
1125/50i, 1250/50i (Component Video, RGB, DVI, SDI, HDMI) | 1280x768@60Hz (DVI) |
•If “Input lock” in Options menu is set to other than “Off”, MULTI PIP function isn’t available.
•Sound output is from the picture which is selected in Audio OUT (PIP) (See page 25).
•In 2 screen display, the same input mode cannot be selected for the main picture and sub picture.
•The main picture and sub picture are processed by different circuits, resulting in a slight difference in the clarity of the pictures. There may also be a difference in the picture quality of the sub picture depending on the type of signals displayed on the main picture and depending on the
•Due to the small dimensions of the sub pictures, these sub pictures cannot be shown in detail.
•Computer screen picture is displayed in a simplified format, and it may not be possible to discern details on them satisfactorily.
•Following combinations of two analog signals cannot be displayed simultaneously;
Component - Component, Component - PC (RGB), PC (RGB) - Component, PC (RGB) - PC (RGB)
•Refer to each board’s operating instruction for DVI, SDI, HDMI’s corresponding signals.
22
