Initial selections
Selecting the input signal
Select the input signals to be connected by installing the optional Terminal Boards.
Press to select the input signal to be played back from the equipment which has been connected to the Plasma Display.
Input signals will change as follows:
•
INPUT1A INPUT1B INPUT2 PC
SLOT1 is for dual input so that you can select INPUT1A or
INPUT1B for INPUT1.
INPUT1A : VIDEO signal terminal in SLOT1
INPUT1B :
•
INPUT1 INPUT2A INPUT2B INPUT3 PC
SLOT2 is for dual input so that you can select INPUT2A or
INPUT2B for INPUT2.
INPUT2A : VIDEO signal terminal in SLOT2
INPUT2B :
Notes:
•Selecting is also possible by pressing the INPUT button on the unit.
•Input terminal will not be selected if the terminal board is not installed into the SLOT.
•Select to match the signals from the source connected to the component/RGB input terminals. (see page 36)
•In 2 screen display, the same input mode cannot be selected for the main picture and sub picture.
INPUT MENU 
+/
ENTER/ 
Selecting the On-Screen Menu Language
Press to display the SET UP menu. Press to select OSD LANGUAGE.
Press to select your preferred language.
Selectable languages
English(UK) 
Deutsch
Français
Italiano
Español
ENGLISH(US)
.......(Chinese)
.......(Japanese)
Русский .......(Russian)
SET UP | 1/2 |
SIGNAL
| RGB |
|
|
|
|
INPUT LABEL | PC |
|
|
|
|
POWER SAVE | OFF |
|
|
|
|
STANDBY SAVE | OFF |
|
|
|
|
POWER MANAGEMENT | OFF |
|
|
|
|
AUTO POWER OFF | OFF |
|
|
|
|
OSD LANGUAGE | ENGLISH (US) |
18
