Panasonic TH-37PR10U, TH-42PR10U - page 38

38

3/3

Options

Off

Off

Off

V. lnstallation

Rotate

Slot1

Serial Slot Select

Slot power

Item Effect Adjustments

Slot Power

Off Auto On

Off: Power is not transmitted to the slot power.

Auto: Power is transmitted to the slot power only when main power is on.

On: Power is transmitted to the slot power when main power is on or in the standby state.

Note: In some cases, power is transmitted to the slot power when main power is on or in the standby

state regardless of the slot power setting.

V.Installation Off On Note: This mode is unavailable.

Rotate Off On Off: Does not rotate the image.

On: Rotates the image 180 degrees.

Serial Slot

Select

Slot1 Slot2 Slot3

Selects the slot which communicates serial.

Note: The setting of an external command can be set only from the ﬁ xed serial terminal (see page 11).

Normalization

When both main unit buttons and remote control are disabled due to the “Button lock”, “Remocon User level” or “Remote

ID” adjustments, set all the values “Off” so that all the buttons are enabled again.

Press the

VOL

button on main unit together with button on the remote control and hold for more than 5 seconds. The

“SHIPPING” menu is displayed and the lock is released when it disappears.

Options Adjustments

Contents

Main CAUTION Important Safety Instructions Table of Contents Dear Panasonic Customer FCC STATEMENT Safety Precautions CAUTION When using the Plasma Display Safety Precautions / Maintenance Maintenance WARNING Setup AC Power Supply Cord If problems occur during use Page 1 2 Connections Connections PC Input Terminals connection Connections SERIAL Terminals connection Power ON / OFF Initial selections Selecting the On-Screen Menu Language Selecting the input signal Basic Controls Basic Controls 1/2PICTURE 2/2 PICTURE 1/2 On-Screen Menu Displays [ from the unit ] To PICTURE adjust menu (see page 22) To ADVANCED SETTINGS (see page 22, 23) Press to select ON. Press to enter ADVANCED SETTINGS. On-Screen Menu Displays ASPECT Controls Adjusting POS. /SIZE 1 A B A B A B B A B A B A C D MULTI PIP Advanced PIP (When Advanced PIP is On) PICTURE Adjustments PICTURE Adjustments ADVANCED SETTINGS A SOUND Adjustment MUTE 1 2 Digital Zoom 1 PRESENT TIME SETUP / SET UP TIMER PRESENT TIME SETUP PRESENT TIME SETUP / SET UP TIMER SET UP TIMER SCREENSA VER NEGATIVE / SCROLL selection MODE selection START setting 5 Setup of SCREENSAVER Time SCREENSAVER (For preventing image retention) 1 Note: Timer function will not work unless PRESENT TIME OF DAY is set. Reduces screen image retention SIDE BAR ADJUST SCREENSAVER (For preventing image retention) 1 Reduces power consumption Customizing the Input labels SET UP for Input Signals 3D Y/C FIL TER 2 COMPONENT / RGB IN SELECT 3:2 PULLDOWN / VIDEO NR COLOR SYSTEM / Panasonic AUTO SET UP for Input Signals SYNC Setting RGB sync signal 2 H-FREQ. (kHz) / V-FREQ. (Hz) Displays the H (Horizontal) / V (Vertical) frequencies. Options Adjustments Press to display the Setup menu. Press to select OSD Language. Press and hold until the Options menu is displayed. Press to select your preferred menu. Press to adjust the menu. Press to exit from Options menu. Page Page Page Weekly Command Timer Page Shipping condition Troubleshooting Before you call for service, determine the symptoms and make a few simple checks as shown below. Symptoms Checks Plasma Display panel Symptoms Check PC input signals Command list of Weekly Command Timer the unit or enter the command VMT:0 to unlock Picture Mute. Specifications Warranty Part Warranty Labor Warranty Exceptions http://www.panasonic.com/support/ OR OR Website: In Puerto Rico For service call 787-750-5135 LIMITED WARRANTY STATEMENT Matsushita Electric Industrial Co., Ltd.