Panasonic TH-42PR11UK Initial selections, Selecting the input signal, INPUT1 INPUT2 INPUT3 PC

Initial selections

Selecting the input signal

Select the input signals to be connected by installing the optional Terminal Boards.

Press to select the input signal to be played back from the equipment which has been connected to the Plasma Display.

Input signals will change as follows:

INPUT1 INPUT2 INPUT3 PC

Notes:

• Selecting is also possible by pressing the INPUT button on the unit.

• Input terminal will not be selected if the terminal board is not installed into the SLOT.

• Select to match the signals from the source connected to the component/RGB input terminals. (see page 30)

•In 2 screen display, the same input mode cannot be selected for the main picture and sub picture.

•Image retention (image lag) may occur on the plasma display panel when a still picture is kept on the panel for an extended period. The function that darkens the screen slightly is activated to prevent image retention (see page 40), but this function is not the perfect

solution to image retention.

INPUT MENU VOL ENTER/

Swing up the door at “PULL”.

Selecting the On-Screen Menu Language

Press to display the SET UP menu. Press to select OSD LANGUAGE.

Press to select your preferred language.

Selectable languages

English(UK)

Deutsch

Français

Italiano

Español

ENGLISH(US)

.......(Chinese)

.......(Japanese)

Русский .......(Russian)

SET UP 1/2

SIGNAL

SCREENSAVER

COMPONENT/RGB-IN SELECT

	RGB
INPUT LABEL	PC
POWER SAVE	OFF
STANDBY SAVE	OFF
POWER MANAGEMENT	OFF
AUTO POWER OFF	OFF
OSD LANGUAGE	ENGLISH (US)

13