SCREENSAVER (For preventing image retention)
Do not display a still picture, especially in 4:3 mode, for any length of time. If the display must remain on, a SCREENSAVER should be used.
1
Press to display the SET UP menu.
2 | Press to select the SCREENSAVER. |
|
Press to select the SCREENSAVER screen.
3 FUNCTION selection
Press to select the FUNCTION.
Press to select the desired function.
NEGATIVE IMAGE 
SCROLLING BAR ONLY
WHITE SCREEN 
OVERLAY SCROLLING BAR
SET UP |
|
| 1/2 |
SIGNAL |
|
| |
SCREENSAVER |
|
| |
| |||
|
| RGB |
|
INPUT LABEL |
| PC |
|
POWER SAVE |
| OFF |
|
STANDBY SAVE | OFF |
| |
POWER MANAGEMENT | OFF |
| |
AUTO POWER OFF | OFF |
| |
OSD LANGUAGE | ENGLISH (US) | ||
SCREENSAVER |
|
|
|
PRESENT TIME OF DAY | 99:99 | ||
START | SCROLLING BAR ONLY | ||
FUNCTION | |||
MODE |
| OFF |
|
START TIME |
| 6:15 |
|
FINISH TIME |
| 12:30 | |
SIDE BAR ADJUST | BRIGHT | ||
WOBBLING |
| OFF |
|
PEAK LIMIT |
| OFF |
|
4
NEGATIVE IMAGE : A negative image will be displayed on the screen.
SCROLLING BAR ONLY : A white bar will scroll from left to right. The image won't be displayed.
OVERLAY SCROLLING BAR : The brightness of the image will be decreased and a white bar will scroll on it.
WHITE SCREEN : The whole screen will be white.
MODE selection Note: OVERLAY SCROLLING BAR is not effective during two screen display.
5
Press to select the MODE.
Press to select each mode items.
START setting
Off
INTERVAL : Operates when SHOW DURATION and SAVER
DURATION are set up and those times arrive. TIME OF DAY : Operates when START TIME and FINISH TIME are
|
| set up and those times arrive. | ||
|
| |||
ON | : Operates when START is selected and the ACTION | |||
|
| ( |
| ) button is pressed. |
|
|
| ||
When the MODE is set to ON, press to select START.
Press to start SCREENSAVER.
The menu screen will disappear and the SCREENSAVER will be activated. To stop the
SCREENSAVER under ON, press the R button or any buttons on the main unit.
Note: When the display is turned off, the SCREENSAVER will be deactivated.
Setup of SCREENSAVER Time
After selecting TIME OF DAY or INTERVAL, the relevant Time Setup will become available for selection and the Operating Time may be set. (Time cannot be set when “MODE” is “ON” or “OFF”.)
Notes:
Press to select START TIME / FINISH TIME (When TIME OF DAY is selected).
Press to select SHOW DURATION / SAVER DURATION (When INTERVAL is selected).
Press to setup. 
button: Forward 
button: Back
SCREENSAVER |
| |
PRESENT TIME OF DAY | 15:00 | |
START | SCROLLING BAR ONLY | |
FUNCTION | ||
MODE | TIME OF DAY |
|
START TIME | 6:15 |
|
FINISH TIME | 12:30 |
|
SCREENSAVER |
| |
PRESENT TIME OF DAY | 15:00 | |
•Pressing “
” or “
” button once changes the Time 1 minute.
[However, switching occurs every 15 minutes when Periodic Time is selected.]
•Pressing “
” or “
” button continuously changes the Time by 15 minutes.
START |
|
| ||
|
|
|
|
|
FUNCTION | SCROLLING BAR ONLY | |||
|
|
|
|
|
MODE |
|
| INTERVAL | |
SHOW DURATION | 12:00 | |||
SAVER DURATION | 3:00 | |||
|
|
|
|
|
Note: Timer function will not work unless “PRESENT TIME OF DAY” is set.
26
