Panasonic TH-37PWD6UX, TH-42PWD6UX Sync, FREQ. kHz/V-FREQ. Hz, Setting RGB sync signal, On G

SET UP for Input Signals

SYNC

Select SIGNAL from the “SET UP” menu during RGB input signal.

Press to select each item.

R

Press to exit from adjust mode.

SET UP	1/2
COMPONENT/RGB-IN SELECT
	RGB
INPUT LABEL	RGB1
SIGNAL
SCREENSAVER
POWER SAVE	OFF
STANDBY SAVE	ON
POWER MANAGEMENT	OFF
OSD LANGUAGE	ENGLISH (US)

Press (ACTION) button

SIGNAL		[ RGB ]
SYNC		H & V
H-FREQ.	31.5	kHz
V-FREQ.	60.0	Hz

Note:

Sync cannot be adjusted while a DVI signal is being applied.

Setting RGB sync signal

Confirm that the input is set to RGB INPUT (this setting is valid only for RGB INPUT signal).

H & V:	The H and V sync signals are input from the HD/VD connector.
ON G:	Uses a synchronized signal on the Video G signal, which is input
	from the G connector.
CS:	Uses a synchronized signal of Composite Sync input.

SYNC	H & V
SYNC	ON G

SYNCCS

H-FREQ. (kHz)/V-FREQ. (Hz)

Displays the H (Horizontal)/V (Vertical) frequencies.

This display is valid only for RGB input and DVI input signal.

Display range:
Horizontal	15	- 110 kHz
Vertical	48	- 120 Hz

H-FREQ. 31.5 kHz V-FREQ. 60.0 Hz

34