SET UP for Input Signals
COLOR SYSTEM / Panasonic AUTO
Select SIGNAL from the “SET UP” menu during VIDEO (S VIDEO) input | SET UP | 1/2 | |
signal mode.(“SIGNAL [VIDEO]” menu is displayed.) |
|
|
|
|
|
| |
| ||||
|
|
| RGB | |
Press to select the “COLOR SYSTEM” or | INPUT LABEL |
| RGB1 | |
| SIGNAL |
| ||
“Panasonic AUTO”. |
|
| ||
SCREENSAVER | ||||
| ||||
Press to select each function. | POWER SAVE |
| OFF | |
STANDBY SAVE |
| ON | ||
|
| |||
| POWER MANAGEMENT | OFF | ||
If the image becomes unstable: | OSD LANGUAGE |
| ENGLISH (US) | |
|
|
| ||
With the system set on Auto, under conditions of | Press | (ACTION) button | ||
low level or noisy input signals the image may in |
|
|
| |
rare cases become unstable. Should this occur, | SIGNAL |
| [ VIDEO ] | |
set the system to match the format of the input |
| |||
3D Y/C FILTER (NTSC) | ON | |||
signal. | ||||
| COLOR SYSTEM |
| AUTO | |
| 3:2 PULLDOWN |
| OFF | |
| Panasonic AUTO (4:3) | NORMAL | ||
| Mode |
|
| Function |
|
| |
|
|
|
| ||||
| COLOR SYSTEM | Set the color system to match the input signal. If set to “AUTO”, the color system is |
| ||||
|
| determined automatically. |
|
|
|
| |
|
| AUTO | PAL | SECAM | M NTSC | NTSC |
|
|
|
|
| ||||
| Panasonic | Set to “NORMAL” to view 4:3 images in an unchanged format when Panasonic AUTO |
| ||||
| AUTO (4:3) | is selected. If you would like to view 4:3 images in Just format, set to “JUST”. |
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3:2 PULLDOWN
When ON, the display attempts to reproduce a more natural interpretation of sources such as movie pictures, which
are recorded at 24 frames per second. | SET UP |
| 1/2 |
If the picture is not stable, turn the setting to OFF. |
| ||
Select “SIGNAL” from the “SET UP” menu during VIDEO (S VIDEO) or | RGB | ||
|
| ||
COMPONENT input signal.(“SIGNAL [VIDEO]” or “SIGNAL [COMPONENT]” menu |
|
| |
INPUT LABEL |
| RGB1 | |
is displayed.) |
| SIGNAL |
|
Press to select 3:2 PULLDOWN. | SCREENSAVER |
| |
POWER SAVE |
| OFF | |
| STANDBY SAVE |
| ON |
| POWER MANAGEMENT | OFF | |
Press to set ON/OFF. | OSD LANGUAGE | ENGLISH (US) | |
| Press | (ACTION) button | |
| SIGNAL | [ VIDEO ] | |
R | 3D Y/C FILTER (NTSC) | ON | |
Press to exit from adjust mode. | COLOR SYSTEM | AUTO | |
3:2 PULLDOWN | OFF | ||
| |||
Note: | Panasonic AUTO (4:3) | NORMAL | |
When ON, this setting only affects the following signal input: |
|
| |
• NTSC / PAL signal input during “VIDEO (S VIDEO)” input signal. | SIGNAL | [ COMPONENT ] | |
• 525i(480i) signal input during “COMPONENT” input signal. | 3:2 PULLDOWN | OFF |
33
