Indicator / Control panel
●When pressing 1, 2, 3 buttons, the control panel guide appears on the right side of the screen for 3 seconds to highlight the pressed button.
1
2
3
4
5 6 7
Rear side of the TV
1Input mode selection
●Press repeatedly until you reach the desired mode.
[Main Menu]
●Press and hold for about 3 seconds to display main menu.
OK (when in the menu system)
2Channel Up / Down
Cursor Up / Down (when in the menu system)
3Volume Up / Down
Cursor Left / Right (when in the menu system)
4Mains power On / Off switch
●Use to switch the mains power.
5Remote control signal receiver
●Do not place any objects between the TV remote control signal receiver and remote control.
6Ambient sensor
●Senses brightness to adjust picture quality when [Ambient Sensor] in the Picture Menu is set to [On].
7Power LED
Red: Standby
Green: On
●The LED blinks when the TV receives a command from the remote control.
First time Auto
Tuning
Automatically sets up the TV and searches for available TV channels when the TV is turned on for the first time.
●These steps are not necessary if the setup has been completed by your local dealer.
●Please complete connections (p. 7 - 8) and settings (if necessary) of the connected equipment before starting Auto Tuning. For details of settings for the connected equipment, read the manual of the equipment.
1Plug the TV into mains socket and turn power on
● Takes a few seconds to be displayed.
2Select the following items
Set up each item by following the
Example:
Please select your viewing environment.
Home |
| Shop |
■How to use remote control
Move the cursor
Access the item / store the setting
Return to the previous item (if available)
Select the following items
Set up each item by following the
Select your language
Select [Home]
Select [Home] viewing environment to use in your home environment.
●[Shop] is for shop display.
●To change viewing environment later on, you will need to initialise all settings by accessing Shipping Condition.
Set up the network connection
Select your country
10
