10
1
2
1
2
Connections
Speaker terminal (R)
Speaker
terminal (L)
When connecting the speakers, be sure to use only the optional accessory speakers.
Refer to the speaker’s Installation Manual for details on speaker installation.
AC cord connection (see page 15)
Speakers (Optional accessories)
Using the clamper
Secure any excess cables with clamper as required.
Note:
One clamper is supplied with this unit. In case of securing cables at three positions, please purchase it separately.

AC cord connection and fi xing, cable fi xing

Speaker connection

Plug the AC cord into the display unit.
Plug the AC cord until it clicks.
Note:
Make sure that the AC cord is locked on
both the left and right sides.
AC cord fi xing
Unplug the AC cord
Unplug the AC cord pressing the
two knobs.
Note:
When disconnecting the AC cord, be
absolutely sure to disconnect the AC
cord plug at the socket outlet fi rst.
While pressing the lever,
insert the core wire.
Black
Red
Return the lever.
Black
Red
hole
To loosen:
hooks
To remove from the unit:
Insert the clamper
in a hole.
Bundle the cables
snaps
Keep pushing
both side
snaps
Set the
tip in the
hooks
knob
Keep
pushing
the knob
Attach the clamper
When using the Wall-hanging bracket (vertical)
Note:
When using the Wall-hanging bracket (vertical)(TY-WK42PV20), use the holes
and to secure the cables. If the clamper is used on the hole , the cables may
be caught by the wall-hanging bracket.