PICTURE Adjustments

Item

EffectAdjustments
BACKLIGHT

Darker

Brighter

Adjusts luminance of the back light.

 

 

 

 

 

 

PICTURE

Less

More

Adjusts the proper picture contrast.

 

 

 

 

 

 

 

 

 

Adjusts for easier viewing of dark

BRIGHTNESS

Darker

Brighter

pictures such as night scenes and

 

 

 

black hair.

COLOR

Less

More

Adjusts color saturation.

 

 

 

 

 

 

TINT

Reddish

Greenish

Adjusts for natural flesh tones.

 

 

 

 

 

 

SHARPNESS

Less

More

Adjusts picture sharpness.

 

 

 

 

 

 

Notes:

“COLOR” setting can be adjusted for Video input signal.

You can change the level of each function

(BACKLIGHT, PICTURE, BRIGHTNESS, COLOR, TINT, SHARPNESS) for each

PICTURE MENU.

The setting details for STANDARD, DYNAMIC and CINEMA respectively are memorized separately for each input terminal.

The “TINT” setting can be adjusted for NTSC signal only during Video (S Video) input signal.

In PICTURE, there is not a noticeable change even when contrast is increased with a bright picture or reduced with a dark picture.

ADVANCED SETTINGS

Item

Effect

 

 

 

 

 

Details
INPUT

 

 

Adjustment of parts which are extremely bright and hard to see.

LEVEL

Less

More

 

 

 

 

 

 

 

GAMMA

Down

Up

S CURVE

 

2.0

 

2.2

 

2.6

 

 

 

 

 

 

 

 

 

 

 

AGC

OFF

ON

Increases the brightness of dark signal automatically.

 

 

 

 

 

 

 

 

W/B HIGH R

Less

More

Adjusts the white balance for light red areas.

 

 

 

 

 

 

 

 

W/B HIGH G

Less

More

Adjusts the white balance for light green areas.

 

 

 

 

 

 

 

 

W/B HIGH B

Less

More

Adjusts the white balance for light blue areas.

 

 

 

 

 

 

 

 

W/B LOW R

Less

More

Adjusts the white balance for dark red areas.

 

 

 

 

 

 

 

 

W/B LOW G

Less

More

Adjusts the white balance for dark green areas.

 

 

 

 

 

 

 

 

W/B LOW B

Less

More

Adjusts the white balance for dark blue areas.

 

 

 

 

 

 

 

 

Notes:

Carry out “W/B” adjustment as follows.

1.Adjust the white balance of the bright sections using the “W/B HIGH R” , “W/B HIGH G” and “W/B HIGH B” settings.

2.Adjust the white balance of the dark sections using the “W/B LOW R” , “W/B LOW G” and “W/B LOW B” settings.

3.Repeat steps 1 and 2 to adjust.

Steps 1 and 2 affect each other’s settings, so repeat each step in turn to make the adjustment.

The adjustment values are memorized separately for each input terminal.

The adjustment range values should be used as an adjustment reference.

Helpful Hint ( / NORMALIZE Normalization)

On the remote control unit, while the “ADVANCED SETTINGS” menu is displayed, if either the N button is pressed at any time or the ACTION () button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.

26